693707
24
Zoom out
Zoom in
Previous page
1/62
Next page
Connections
Multimix 12R Reference Manual 13
Phonograph turntables
If you're using a record turntable, you may not plug it directly into the
line inputs of the Multimix 12R (well, you can, but it will sound very
thin and noisy). Obtain a phono preamp from your dealer or an
electronics specialty store.
1. Plug the outputs of the phonograph pickup into the RIAA-
equalized phono preamp.
2. Plug the outputs of the preamp into the LINE IN 9-10 or 11-12
inputs of the Multimix 12R.
Do not connect any of the following to any
input of the Multimix 12R!
The speaker output of any power amplifier.
Any source that is too loud for the input (no more than 3 volts RMS
into a [MIC] jack or 13 volts RMS into a [LINE IN] jack).
Any unshielded cable.
Connections
How to connect effect devices and signal
processors
Alesis and other companies make many different types of signal
processors which may be connected to the Multimix 12R mixer. There
are two ways to connect these units: using the AUX system or via the
INSERT jacks.
Effects via Aux Send and Aux Return
If you want to add an effect such as reverb, chorus, or delay to several
different inputs at once, you will use the AUX system.
1. Connect the AUX 2 (POST) AUX SEND output of the 12R to the
input of the effect device. If the effect has a stereo input, check the
manual of the effect to see which jack is the mono jack. (In most
cases, you won't need to connect anything to the other input jack
of the device, but you will still get a stereo effect output).
2. Connect the left and right outputs of the effect device to the
[STEREO AUX RETURN] jacks of the Multimix 12R.
Alternatively, you may connect the output of the effect device to either of
the STEREO LINE channels ([9-10 or 11-12].) This will allow you to
control the effect with a large fader, send the effects to the Aux 1 output
for monitoring, and use EQ on the effect.
About stereo effect devices
If your effect unit has two inputs, in most cases you need to connect from
only ONE Aux Send to the left (mono) input of the effect unit, but you will
still connect both the left and right outputs of the effect to the STEREO AUX
RETURN.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis MultiMix 12R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis MultiMix 12R in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info