693657
39
Zoom out
Zoom in
Previous page
1/70
Next page
Hardware Direct Monitoring
6
37
For outputs 1 and 2, the MIX BLEND knob on the front panel of
the hardware can also be used to control this slider.
7. Narrow/Wide View Switch
You can switch between “Narrow” and “Wide” views of the
HDM panel. Note that the Input Monitor tab is always in Narrow
mode.
8. Metering Options
Choose from a number of different metering options here.
Meter Scale
Under “Meter Scale,” choose “High,” “Medium,” or “Safe.” These
options change the thresholds at which the meters change to
yellow and then to red. WHATEVER SETTING YOU
CHOOSE, THE ACTUAL AUDIO BEING RECORDED IS
UNTOUCHED. Rather, these modes can help keep you from
recording too “hot,” resulting in digital “overs.
Peak Hold time
Set how long the highest peak of the incoming audio should be
displayed.
Peak Reset
Click this button at any time to reset the peak levels of the meters.
9. Bank Hide/Show buttons
In “Wide” mode, not all channels are visible at once. If you are
not using some of your channels, choose to hide them.
Note that these buttons are grayed out in “Narrow” mode.
10. ADAT-S/PDIF Toggle
The HDM mixer can mix 24 inputs. At 44.1kHz and 48kHz, the
io|26 offers 26 inputs, 2 more than the total. Therefore, at these
sample rates, choose to monitor either ADAT 15/16 or S/PDIF.
Your choice here will not affect the number of channels seen by
your DAW. Your DAW will always see all IO|14/26 channels.
This choice only affects the audio that you monitor through this
HDM application.
If you still need to monitor those last two channels, you can always
do so through your Digital Audio Workstation software, though
some increased latency will result.
11. Main Level
The position of the MAIN LEVEL(outs 1/2) knob is indicated
here for convenience (Windows only).
The metering options do not
change how audio is actually
recorded. They only change
how the audio is metered on
screen.
F
or highly unpredictable
audio (live concerts, maniac
drummers, etc.), consider
using “Safe” metering and
trying to keep your audio in
the yellow area of the meter
scale. Then, if an
unpredictable audio event
occurs, your audio is more
likely to be recorded cleanly.
For predictable dynamic
sources, like distorted electric
guitar or sources where
you’ve inserted a hardware
limiter in the recording path,
don’t be afraid to push your
meters up into the red zone.
(Red in this panel means
“caution,” not “uh-oh!”)
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis IO14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis IO14 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alesis IO14

Alesis IO14 Quick start guide - English, German, French, Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info