693657

Alesis IO14 Manual

38
Zoom out
Zoom in
Previous page
1/70
Next page
6
Hardware Direct Monitoring
36
1. Output Monitor Tabs
Use these tabs to select the output pairs to which you will blend in
the incoming signal. Each tab’s HDM mix is completely separate
from the others.
Setting up direct monitor mixes for single musicians and for
multiple musicians
Most commonly, you’ll have a stereo set of speakers attached to
outputs 1/2. This is the output pair to use for your Digital Audio
Workstation’s stereo outputs.
If you are recording a single musician, connect your inputs, and
then select the tab for outputs 1/2. Now, you can easily blend in
the musician’s direct audio with the music coming back from the
Digital Audio Workstation.
When you are recording multiple musicians—each of whom
desires a different monitor mix—use these tabs to create a separate
“monitor mix” for each output pair.
Experiment with creating multiple mixes—doing so puts no strain
on your computer.
2. Pan/Mute/Solo
Set the left/right pan position of the audio here. Also, you can
solo and mute individual channels.
Using the Shift key, click the pan knob to return it to center. Also,
hold down Shift while clicking to mute or solo (or un-mute or un-
solo) all of the inputs at one time.
3. Volume
Set the volume using this slider.
4. Stereo Channel Linking and Unlinking
Use this button to link or unlink the controls for stereo channel
pairs.
5. Channel Names
Just like the output tabs, the incoming audio channels can be re-
named. (Words like “vox” and “snare” probably have more value
than “Analog1” and “ADAT12.”) The names you provide carry
over to all of the tabs.
6. Master HDM Mix Fader
This is the master fader for the Direct Monitor mix for this output
pair. Bringing this fader up or down affects all the channels being
monitored using HDM but does not affect the audio coming back
from the computer.
Once you have set your balances for multiple instruments using
the individual slider, this control allows you to bring your whole
mix into balance with the audio from your Digital Audio
Workstation.
At 176.4k and 192k sample
rates, hardware direct
monitor mixes can only be
heard on outputs 1-4. Audio
will play back from the
computer as normal on all
the channels, but the analog
and digital inputs cannot be
monitored on outputs 5-8.
I
f you hear the input signal
twice—with a short delay
between each instance—
then you are most likely
monitoring through both the
HDM panel and also your
DAW software. Either turn
off input monitoring on your
DAW or mute the
corresponding input on the
HDM panel.
Re
-naming the tabs
You can re-name each of
these tabs by double-clicking
on them and entering your
new name. (Names like
“Singer” and “Drummer”
can be a lot more helpful than
“Out 3-4.”) Note that the
names you type will not alter
the physical routing taking
place in th
e IO14/26.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis IO14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis IO14 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alesis IO14

Alesis IO14 Quick start guide - English, German, French, Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info