794955

Alecto WS5400 Manual

42
Zoom out
Zoom in
Previous page
1/90
Next page
42
BACK LIGHT
The main unit back light can be adjusted, using the [ ON / AUTO ] sliding switch to select the Appropriate brightness:
Slide to the [ ON ] position to set the back light to normal brightness.
Slide to the [ AUTO ] position to set the back light brightness that according to ambient light level.
SET LCD DISPLAY CONTRAST
In normal mode, press [ SNOOZE / CONTRAST ] key to adjust LCD contrast for best viewing on table stand or wall
mounted.
7. MAINTENANCE
BATTERY REPLACEMENT
When low battery indicator “ ” is displayed in Out or CH section of the LCD display, it indicates that the wireless 7-in-1
or current channel sensor battery power give wireless sensor shown is low respectively. Please replace with new batteries.
WIRELESS 7-IN-1 SENSOR MAINTENANCE
REPLACE THE WIND VANE
Unscrew and remove the wind vane for
replacement
REPLACE THE WIND CUP
1. Remove rubber cap and Unscrew
2. Remove the wind cup for replacement CLEANING THE RAIN COLLECTOR
1. Rotate the rain collector by turning it
30°anti-clockwise.
2. Gently remove the rain collector.
3. Clean and remove any debris or insects.
4. Install the collector when it is clean and
fully dried.
CLEANING THE UV SENSOR AND
CALIBRATION
• For precision UV measurement, gentle
clean the UV sensor cover lens with damp
micro-ber cloth.
• Over time, the UV sensor will naturally
degrade. The UV sensor can be calibrated
with a utility grade UV meter, please refer
to Calibration section in previous page for
about the UV sensor calibration.
CLEANING HYGRO-THERMO SENSOR
1. Remove the 2 screws at the bottom of the
radiation shield.
2. Gently pull out the bottom 4 shields.
3. Carefully remove any dirt or insects on the
sensor and ventilation fan (do not let the
sensors inside get wet).
4. Clean the shield with water to remove any
dirt or insects.
5. Install all the parts back when they are clean
and fully dried.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS5400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info