794955

Alecto WS5400 Manual

41
Zoom out
Zoom in
Previous page
1/90
Next page
41
RAIN
To select the rainfall display mode
Press [ RAIN ] key to toggle between:
1. DAILY - the total rainfall from midnight (default)
2. WEEKLY - the total rainfall of the current week
3. MONTHLY- the total rainfall of the current calendar month
4. TOTAL - the total rainfall since the last reset
5. RATE - Current rainfall rate (base on 10 min rain data)
Period of rainfall and rain rate
In normal mode, press and hold [ Rain ] key for 6 seconds to reset all the rainfall records.
To ensure to have correct data, please reset all the rainfall record when you re-install your wireless 7-IN-1
sensor to other location.
LIGHT INTENSITY & UV INDEX
The UV index and light intensity reading show on the bottom right
side of the display.
The console can show the different reading’s daily MAX / MIN records in memory mode.
To view MAX / MIN records
In normal mode, press [ MEM ] key on the front side, to check records in below sequence:
Indoor or current CH MAX temperature Indoor or current CH MIN temperature Indoor or current CH MAX humidity
Indoor or current CH MIN humidity outdoor MAX temperature outdoor MIN temperature outdoor MAX
humidity outdoor MIN humidity MAX Feels like temperature MIN Feels like temperature MAX heat index
temperature MIN wind chill temperature MAX dew point temperature MIN dew point temperature MAX
average wind speed MAX gust wind MAX Beaufort MAX relative baro pressure MIN relative baro pressure
MAX absolute baro pressure MIN absolute baro pressure MAX rain rate MAX UV index, MAX light
intensity. Then press [ MEM ] key for back to normal mode.
You can also, press another key to exit memory mode.
Press and hold [ MEM ] key for 2 seconds to reset the current displayed record.
CALIBRATION
The console is able to calibrate the weather readings:
1. In normal mode, press and hold [ CAL ] key for 2 seconds to enter the
calibration mode as shown on the right.
2. Press [ CH / SET ] key to select different parameter as sequence: Indoor
temperature Indoor humidity CH temperature CH humidity
outdoor temperature outdoor humidity wind speed wind direction
absolute baro pressure rain gain UV gain light intensity gain.
3. While the reading is blinking, press [ WIND / + ] or [ - ] key to adjust the offset
value.
4. When finished, press [ CH / SET ] to proceed with next calibration by
repeating process 2 - 3 above.
5. To return normal mode, press [ CAL ] key once.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS5400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info