708524

Alecto WS-3300 Manual

37
Zoom out
Zoom in
Previous page
1/42
Next page
37
5. CLOCK AND ALARM FUNCTION
5.1 Clock:
Introduction:
The WS-3300 is provided with a built-in DCF receiver which receives the DCF time signal from Frankfurt.
This signal ensures that the clock shows the time very accurately, provided a strong enough signal is being
received. The clock is synchronized with the station in Frankfurt each night at 3am.
Automatic:
Upon installing the batteries in the indoor unit, the weather station performs an automatic setup. After
approx. 3 minutes or quicker, the clock starts searching for the DCF radio signal for the time and date while
the antenna symbol 
correct time. In extreme cases, it can take over a day before the DCF time is shown.
Manually:
If the clock cannot receive the radio signal or cannot receive it well enough, you can set the clock manually
as follows:
1. press and hold the button “MODE/SET” (30) for 2 seconds, 12Hr or 24Hr will appear in the display
2. Use ▼ and ▲MODE/SET” (30) button
3. use the ▼ and ▲

 MODE/SET” (30) button
5. use the ▼ and ▲MODE/
SET” (30) button
6. use ▼ and ▲MODE/SET” (30) button
7. use ▼ and ▲MODE/SET” (30) button
8. use ▼ and ▲ to set the seconds to 0 (this allows you to have the clock run synchronously with your own
MODE/SET” (30) button
9. use ▼ and ▲MODE/SET” (30) button
10. use ▼ and ▲ MODE/SET” (30) button
11. use ▼ and ▲MODE/SET” (30) button
12. use the ▼ and ▲MODE/
SET” (30) button

The clock is now set manually.
When the DCF receiver is enabled and a strong signal is being received, the receiver will overwrite the clock
display (provided that RCC is set to “on”).
The symbol indicates the status of the DCF clock:
no symbol: the DCF receiver is disabled; the displayed time is provided by the internal clock of the
WS-3300
 
the displayed time is provided by the internal clock of the WS-3300
remains lit: the DCF receiver is enabled and is receiving the DCF signal;
the displayed time and date are provided by the DCF atomic clock in Frankfurt
5.2 ALARM CLOCK FUNCTION:
MODE/SET” (30) button until the alarm clock time appears. When the wake-up time
is displayed, press and hold the “MODE/SET” (30) button for 2 seconds to change the wake-up hours with
the ▼ and ▲ buttons. Press “MODE/SET” (30) again to change the wake-up minutes with the ▼ and ▲ but-
tons. Press the button “MODE/SET” (30) again to save the alarm time.
The weather station is provided with wake-up functions. The alarm clock is activated when the alarm clock
icon appears in the display. During the basic display, press the “ ” button to activate the alarm clock. The
icon appears in the display.
5.3 TO DISABLE THE ALARM SIGNAL:
As soon as an active wake-up time is reached, the weather station will sound an alarm signal.

From 10 to 20 seconds, the rhythm of the alarm signal becomes quicker.
From 20 to 30 seconds, the rhythm of the alarm signal becomes even quicker.
The alarm signal has the fastest rhythm after 30 seconds and stops automatically after 2 minutes.
After 24 hours the alarm signal, connected to the set wake-up time, will sound again.
You may stop the alarm beforehand by pressing the “SNOOZE/LIGHT” (36) button or a random button to

… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS-3300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS-3300 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info