707363
15
Zoom out
Zoom in
Previous page
1/20
Next page
LINKING SMOKE DETECTORS USING AN INTERCONNECT-CABLE
You can link smoke detectors of the same type with a cable. To link them, do not use the earthing cable, but ensure you
have an extra cable placed inside your ceiling for this purpose. Preferably use a (harmonized) wire with a diameter of
1,5 or 2,5 mm2 (H05V-U / H07V-U). Follow the same safety standards for this interconnection cable as you would for
installation of mains power cables. The interconnect-cable will lead a high voltage from one smoke alarm to the next. It
relays the signal by using the 0/neutral cable and the interconnect cable. If you switched the 0 and phase cables during
installation the detectors will sound the alarm constantly. By using this link function all devices will give alarm when
one device detects smoke. You can connect a maximum of 12 devices and link-operation is guaranteed as long as all
devices are connected to the same end-group and no switches are part of the same group.
To ensure you know the smoke detectors are inactive in case of power failure, ensure a vital part of your lighting is
attached to the same power group. Please view national standards for proper installation procedure.
USE, TESTING AND MAINTENANCE:
Use: The smoke detectors is operational if the 230V mains power is connected, the 9V backup battery is placed
and the SA-240 is mounted to the ceiling. The SA-240 can only be attached to the ceiling plate if the backup battery
is placed. If the device is operational the green LED will continously light. The red LED will blink every 40 sec. to
indicate the backup battery is ok. Once smoke is detected, the alarm will sound. Once the smoke disappears, the
smoke alarm will stop automatically.
Test:
Hold the test key for at least 2 seconds. The operation is still correct if you hear 2 or three signal tones. Check the
smoke detectors weekly. In alarm status the smoke detector will generate about 85dB(A). Do not use candles, open
fire or cigarettes to test the smoke detector. Test the link-function by holding the test-button even longer. The other
detectors will now start beeping.
Brown - Connect to phase
White - Cable to connect to other smoke alarms of the same type (DO NOT
attach to any ground cable)
Blue - Connection to 0
Phase (Brown)
Connection cable
Neutral/0 (Blue)
SLAAPKAMER
SLAAPKAMER
BADKAMER
HOME-OFFICE
WOONKAMER
KEUKEN
GARAGE
NOITUAC
RESNI T AB RETT
Y
LREPORP Y
9V BLOCK
SLAAPKAMER
SLAAPKAMER
BADKAMER
HOME-OFFICE
WOONKAMER
KEUKEN
GARAGE
NOITUAC
RESNI T AB RETT Y
LREPORP Y
9V BLOCK
SLAAPKAMER
SLAAPKAMER
BADKAMER
HOME-OFFICE
WOONKAMER
KEUKEN
GARAGE
NOITUAC
RESNI T AB RETT Y
LREPORP Y
9V BLOCK
dode
luchtruimte
60 cm minimaal
90 cm
minimaal
90 cm
minimaal
Niet in deze ruimte
In de buurt
van deze ruimte
Test
weekly
SLAAPKAMER
SLAAPKAMER
BADKAMER
HOME-OFFICE
WOONKAMER
KEUKEN
GARAGE
NOITUAC
RESNI T AB RETT
Y
LREPORP Y
9V BLOCK
Do not place here
Place near here
Minimum distance
SA-240-8712412574636-Manual v2.2
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto SA-240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto SA-240 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info