Manual Alecto LE-180 (page 21 of 24) (English, German, Dutch, French)

794961

Zoom out

Zoom in

1/24

4. In the DMX-OUT plug of the last LE-180 device a XLR plug should be inserted. The

terminating resistance should be 120

and be soldered on connection 2 and 3.

Please contact your supplier if needed.

Shielded wired plugs, XLR plugs and termination resistors are not included.

Master-slave conguration:

1. Press the FUNC Button of the rst LE-180 device

2. Switch with or to

3. Press the ENTER Button and select with or the status (MASTER)

4. Press ENTER to conrm

5. Repeat these steps for all LE-180 devices but select at step 3 the status

(SLAVE)

The now all connected LE-180 devices will show synchronously the same light-effect as

selected on the rst LE-180 as MASTER.

Managing through the DMX512 controller:

If you have a DMX512 device you need to address every single LE-180 device digitally

to control a certain device. Either you give all devices a single digital address or you

choose to give several devices the same digital address so these devices simultaneous-

ly react on the control signal of the DMX512. The LE-180 device has 2 channels.

1. Press the FUNC Button of the rst LE-180 device

2. Switch with or to

3. Press the ENTER Button, the actual selected address lights-up

4. Select with or the desired address ( - )

Warning: The LE-180 has 2 channels, reserve therefore 2 channels

5. Press ENTER to conrm

Through the DMX512 you have the following light-effects:

Channel: Value: Effect:

CH1(*) 0-9 No functions

10-49 sound controlled

50-255 automatic, speed goes from slow to fast

CH2(*) 0-9 all effects

10-31 effect 1

32-63 effect 2

64-95 effect 3

96-127 effect 4

128-159 effect 5

160-191 effect 6

192-223 effect 7

224-255 effect 8

*: Use here the channels as implemented at instruction 4

Through the Alecto website, under 'software' You can dowload a xture for the LE-180.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto LE-180 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto LE-180 Manual

Product: