794961

Alecto LE-180 Manual

20
Zoom out
Zoom in
Previous page
1/24
Next page
20
Operation:
If you connect the mains power supply into the socket plug (100-240V) , the LE-180
activates itself automatically.
The display shows or shows the previous effect set up or program.
The LE-180 plays the selected light-effect whereby the speed of the light-effect depends
on the ambient sound. So, the power of the effect depends on the ambient sound , the
harder the noises, the faster the light-effects show.
Effect set-up:
The LE-180 has 8 preselected programs for the light-effects. Effect 0 sequences all
available light-effects.
1. Press the FUNC Button.
2. Switch with or to
3. Press the ENTER Button, the number of the current light-effect lights up.
4. Select with or the goal state ( - )
5. Press Enter to conrm.
6. The Display stops with ashing and the light-effect starts.
The speed of the light-effect.
You either give a light show with a xed speed or show a speed that depends on the
ambient sound available. How heavier the ambient sound are how faster the Rhythm of
the light-effects are.
1. Press the FUNC Button.
2. Switch with or to
3. Press the ENTER Button and select with or to activate or deactivate the sound
detection
4. Press ENTER to conrm
DMX connection:
The LE-180 has a DMX512 plug in and out. With this you can connect several LE-180
devices with each other to show simultaneously the selected light-effect. (Master-Slave).
You also can connect the LE-180 to a DMX512 to set up the preferred light-effect from a
distance.
To connect to a DMX512 controller: To connect as Master-Slave:
1. Put the cable of the DMX512 Go to step 2
controller into the DMX-IN plug
of the rst LE-180 device. Only use
shielded cables with XLR plugs.
2. Connect the DMX-OUT plug of the rst LE-180 device with the DMX-IN plug of the
next LE-180 device. Use therefore a shielded wire with XLR plugs.
3. Repeat this step until all LE-180 devices are connected.(Max 32)
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto LE-180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto LE-180 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info