458285

Alecto DVM 70 Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
10
11
5 ECO MODE
5.1 OPERATION:
If ECO mode is disabled, there is a continuous connection between the camera unit and the
monitor unit, and you have continuous video. The audio is only transmitted if the sound level
you set under ‘Sensitivity’ is exceeded.
If you enable ECO Mode, both the camera unit and the monitor unit go into sleep mode, and
there is NO connection. As soon as the camera unit detects a sound that exceeds the set sen-
sitivity level, the camera unit is switched on and establishes a connection with the monitor unit.
Both video and audio are now transmitted. A few seconds after the sound near the camera unit
stops, the message ‘Eco Mode activated’ appears and the system returns to sleep mode. The
screen now goes black again.
Pleasenotethatoncethesetgoesintosleepmode,theconnectionindicatorlightashesrap-
idlytoindicatethatthereisnoconnection.Inthiscase,thisisnotawarning,butaconrmation
that the system is in the idle state.
5.2 SWITCHING ECO MODE ON/OFF:
1. press the M button
2. use or to scroll to ECO MODE
3. press the M button
4. use or to switch this function on or off
5. press the Mbuttontoconrmyourchoice
6. press to close the menu
as soon as you switch ECO mode on, the lights up
5.3 FORCED VIEWING:
To force the system to allow you to view the room (or, for example, to check the proper function-
ing of the set), you can switch the camera unit on from the monitor unit:
1. press the button
2. the message ‘Eco Mode activated’ appears on screen
3. press the button again to activate the camera unit
4. after around 10 seconds the camera unit switches itself off again
5.4 OUT OF RANGE INDICATION WITH ECO MODE ON:
When the units are in sleep mode, the ‘No link’ message in the display is disabled (the con-
nectionindicatorlightdoes,however,ashrapidly).Iftheconnectionisabruptlycutoffattimes
when there is a connection, the ‘No link’ message appears in the display and, if set, you will
hear the range alarm.
6 SETTINGS
6.1 INTRODUCTION:
The DVM-70 has several settings that you can easily adjust via a simple on-screen menu.
1. press the M button to open the menu
2. use the or buttons to scroll through the menu options
3. press the M button to select the setting (the colour changes from light blue to dark blue)
4. use the or buttons to change the setting (you will hear 2 beeps when you reach the
start or end of the list)
5. press the M button to save the change
6. press to close the menu
if you do not press any button for 10 seconds, the menu is closed and the normal im-
age is displayed again.
At any time, you can go one step back in the menu structure by pressing the button.
6.2 MENU LANGUAGE:
You can set the language in which the various instructions are displayed on screen:
1. press the M button
2. use or to scroll to LANGUAGE (TAAL when the Dutch language is selected)
3. press the M button
4. use or to scroll to the desired language
5. press the Mbuttontoconrmyourchoice
6. press to close the menu
6.3 VIBRATING ALARM:
If you have turned off the sound on the monitor unit, the DVM-70's vibrate function can still alert
you to sound signals from the camera unit:
• if ECO mode is on and the camera unit detects a noise, the image is switched on and the
monitor unit vibrates 3 times in quick succession
• if ECO mode is off, the monitor unit vibrates 3 times in quick succession as soon as the
camera unit detects a loud noise
• if the sound is turned on, the vibrate function is NOT active
1. press the M button
2. use or to scroll to VIBRATION
3. press the M button
4. use or to switch this function on or off
5. press the Mbuttontoconrmyourchoice
6. press to close the menu
when you switch on the vibrating alarm, it is activated briey as a conrmation
also, when you set the receiver volume to level 0 (i.e. no sound) and the vibrate func-
tion is on, the vibrating alarm is activated as a conrmation
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DVM 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVM 70 in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto DVM 70

Alecto DVM 70 User Manual - Dutch - 20 pages

Alecto DVM 70 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info