458285
9
Zoom out
Zoom in
Previous page
1/20
Next page
8
9
4 USAGE
4.1 SWITCHING ON/OFF:
Brieypressthe button to switch the unit on.
Keep this button pressed for 2 to 3 seconds to switch the unit off.
4.2 CONNECTION INDICATOR:
As soon as the monitor unit is switched on, the connection indicator ashesrapidly
and the monitor unit starts searching for the camera unit. Once the camera unit has been
found,thisindicatorwilllightcontinuouslyorwillstartashingataslowpace.
4.3 MONITOR UNIT VOLUME:
Press the
VOL
button repeatedly to increase the receiver volume.
Press the
VOL
button repeatedly to reduce the receiver volume.
If the screen is switched on, the volume level is displayed at the top: = max vol-
ume, = min volume, = sound off
If you have switched off the sound, the lamp also lights up. This gives you an indication
that you have turned off the sound, even if the video is switched off.
when the max. or min. value is reached, 3 short beeps will be heard
if you have switched on the vibrating alarm (see section 6.3), the vibration will be
activated as soon as you turn the sound off, as a conrmation that the ‘vibrating alarm’
function has been enabled
if ‘Zoom in’ (see below) is enabled, you cannot adjust the volume; switch ‘Zoom in’ off
rst
ATTENTION: When your baby is sleeping and the baby-unit does not hear any sound, the loud-
speaker of the parents-unit will be switched off, irrespective the volume setting. As soon as the
baby makes any noise, the loudspeaker will be switched ON again.
4.4 ZOOM IN:
Press the button to see a close-up of the image.
Use the or or or buttons to move up, down, left or right.
Press the button again for normal viewing.
4.5 SWITCHING THE VIDEO OFF:
If ECO mode is not enabled, the video is transmitted continuously. You can turn this off by
pressing the button. This does not affect the sound.
Press any button on the monitor unit to switch the video back on again.
As soon as one of the alarm functions is activated (see Chapter 6), the video is also
switched on.
4.6 TALKBACK:
Press the button to talk back to the camera unit. You can talk for as long as you hold
the button pressed down. On the camera unit, you can adjust the volume with the + and -
buttons.
If you have activated the lullabies, they will be temporarily interrupted during the talkback.
4.7 RECEPTION INDICATOR / OUT OF RANGE MESSAGE:
In the upper left-hand corner of the image on the monitor unit, there is an indication of the
strength of the signal being received from the camera unit.
: very good reception, : standard good reception, : reasonable reception
In all cases, the audio and video quality is shown with the same level.
Assoonasthesignalstrengthisinsufcienttoreceiveaudioandvideo(only lights up),
the warning ‘NO LINK’ appears in the image. After a few seconds the screen goes black,
andtherangelightstartsashingrapidly.
If any button on the monitor unit is pressed, the screen lights up with the message ‘Waiting
for connection...’. After approximately 10 seconds, the screen goes black again.
As soon as the monitor unit and the camera unit are back in range of each other, the im-
age lights up continuously.
the same happens if the camera unit is switched off with the on/off button or if the bat-
teries become empty in the case of mobile use
4.8 LULLABIES:
You can play lullabies from the camera unit. You can start and stop these lullabies both directly
on the camera unit and via the monitor unit.
Camera unit:
Press the button to start the lullabies.
Lullaby 1 is played repeatedly for 15 minutes.
Press the button to select a different lullaby.
Adjust the volume by pressing the + and - buttons.
The lullaby stops playing automatically after 15 minutes, or you can stop it before that
time by pressing the button.
it is not possible to enter a setting on the camera unit to play all the songs, the select-
ed song is played repeatedly for 15 minutes
Monitor unit:
1. press the M button to open the menu
2. scroll with or to the ‘LULLABY’ option
3. press the M button
4. use or to select the desired lullaby or select ‘All’ to play all the songs one after an-
other
5. press the M button
6. use or to select the option ‘Play’
7. press the M button, the lullaby starts playing
8. repeat the above instructions, but in step 6 select the option ‘Stop’ to stop the lullaby
playing
the lullabies are played for 15 minutes and stops automatically
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DVM 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVM 70 in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto DVM 70

Alecto DVM 70 User Manual - Dutch - 20 pages

Alecto DVM 70 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info