Manual Alecto DVM 50 (page 31 of 36) (English, German, Dutch, French)

803225

Zoom out

Zoom in

1/36

Select a camera:

1. Press 4x on the button.

2. Press the

and

keys to select the camera.

A ‘ ‘ behind the camera number will indicate that a camera is logged in.

The ‘scan’ function allows the parent unit to show every camera for 10 seconds; note, if

the camera is switched off or out of range, the out of range picture will be shown and the

out of range beep tones will sound.

3. Press 1x on the button to save the setting and exit the menu.

See chapter 5 on how to add additional cameras.

4.4 AUTOMATIC NIGHT VISION:

The baby unit has 6 built in infrared LEDs; These LEDs will automatically turn on when the baby unit

detects darkness and turn off again when it gets light.

These LEDs can illuminate objects up to a distance of about 2 meters.

Note that when the night vision LEDs are turned on, the image on the parent unit will be displayed in

black /white.

Attention: infrared beams cannot be perceived by the human eye; it is not possible to detect that the

LEDs have been switched on with the naked eye. However, depending on the type infrared LED there

may be a red glow which is visible.

5 EXPANDING MULTIPLE CAMERAS

5.1 GENERAL:

The DVM-50 parent unit can register up to 4 cameras. The parent unit can select the desired camera

by scrolling through the menu. Using the menu on the DVM-50 parent unit you can select the desired

camera or you can rotate all the connected cameras using the (scan function).

Note: the receiver does NOT automatically switch to the camera where sound is detected.

Expansion Cameras (DVM-51) are available through the Alecto service desk either by phone: 073

6411 355 (NL), 03 238 5666 (B), 0180 503 0085 (D), or via the website at: www.alecto.info.

5.2 REGISTRATION OF EXTRA CAMERAS:

1. Connect the power adapter to the new baby unit, put the other end of the adapter into a 230V elec-

trical outlet and turn on the camera..

2. Press the button on the parent unit 4x.

3. Use the

and

buttons to select a free ‘camera connection’.

A ‘ ‘behindacameranumberwillindicatethatacameraisalreadyloggedontoaspecic

connection. If you connect a new camera to this number, the connection with the old camera

will be lost; preferably chose a camera number without a ‘ ‘ next to it.

4. Press the

button for 2 seconds button until the picture appears.

5. Press once on the button, the lightwillashquickly.

6. Within 10 seconds, press once on the PAIRING button located at the back of the new camera. The

lightindicatoronthefrontofthecamerawillashquickly.

7. After a few seconds, the parent unit will have found the new camera and the picture will be shown

on the display of the parent unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVM 50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7.63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto DVM 50 Manual

Product: