803225

Alecto DVM 50 Manual

29
Zoom out
Zoom in
Previous page
1/36
Next page
29
3 INSTALLATION
3.1 BABY UNIT:
Power:
1. Connect one of the included 6V power adapters into the 6V DC socket of the baby unit.
2. Plug the power adapter into a 230V electrical outlet.
Only use the supplied power adapter model number 5E-AD060080-E.
When used as a baby monitor: Make sure the baby cannot touch the baby monitor or the
cord. Place the baby unit at least 2 meters away from the baby and tape up any additional
long wires with tape or special wire ties.
Wall mounting:
Drill two holes next to each other in the wall 6.7 cm apart and insert two screws. Leave the screw head
out by a few millimetres.. Hang the baby unit on the wall by sliding the notches on the camera stand
down onto the screws. Tie the adapter cord neatly up with special wire ties.
Placement tips:
• When used as a baby monitor, place the baby unit a minimum distance of 2 meter away from your
baby and make sure the power adaptor cord is safely tucked away.
• For an optimum connection range, it is preferred to set the baby unit as high as possible and away
from large metal surfaces.
3.2 PARENT UNIT:
Power:
The parent unit can be powered directly from the supplied rechargeable battery, or the included power
adapter. When you connect the power adapter it will also charge the battery so that the parent unit can
be used cordless.
Battery:
1. Open the battery compartment by sliding the battery cover on the back off.
2. Connect the plug in the battery compartment and insert the battery according to the illustration.
3. Slide the battery cover back onto the parent unit.
Connecting the plug and inserting the battery without force.
Only insert the supplied rechargeable Li-ion Polymer battery (3.7V,1500mAh).
Power adapter:
1. Connect the 6V power adapter to the other 6V DC socket located on the side of the parent unit.
2. Plug the adapter into a 230V electrical outlet.
Use only the supplied power adapter model number 5E-AD060080-E.
Make sure that the power adapter cord cannot cause any tripping or falling. Tie up any long wires with
tape or special purpose wire ties.
Charging:
The battery will begin charging once you have connected the parent unit to the power adapter and
then the other end of the adapter into a 230V electrical wall outlet.
• Thebatteryneedstobechargedforatleast15hoursbeforeusingitthersttime,evenifthebat-
tery indicator shows fully charged.
• The charging circuit of the battery is electronically controlled so there is no danger of overcharging.
You can leave the power adapter permanently connected.
• If you are not using the set for long periods of time (> 2 months), it is advisable to take the adapter
out from the electrical wall outlet and remove the battery from the parent unit. When you begin
usingitagain,rstchargethebattery.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DVM 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVM 50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info