Manual Alecto DVM-350 (page 52 of 60) (English, German, Dutch, French)

668918

Zoom out

Zoom in

1/60

Switching display + sound off automatically when your baby is sleeping: (VOX)

You can set the baby monitor to only have images and sound when your baby is

crying.

When your baby is sleeping quietly, then the parent unit will also switch to a

sleeping mode. As soon as your baby starts crying, the display and sound will be

switched back on instantly.

1. Press and hold the button

to open the menu, now release this button.

2. Repeatedly press the button until ‘VOX’ appears on the display, followed by

the current level.

3. Press the button

or to set the activation level:

low sensitivity, your baby must be crying loudly before the baby

monitor switches on

...

high sensitivity, your baby only has to cry softly for the baby monitor

to switch on

OFF VOX switched off, the baby monitor will continuously show images

and transmit sounds of your baby

4. Shortly press the button

to save the setting and to close the menu.

When the display and sound are switched off because of silence, you

can press a random button to switch the parent unit back on. The parent

unit will switch back off again after one minute.

Automatic night vision:

The baby unit is provided with 6 built-in infra-red LEDs; these LEDs will automati-

cally switch on when the baby room becomes darker and they will switch off again

when it becomes light. The LEDs can light objects up to a distance of approxima-

tely 2 meters. When it’s dark, that is when the night vision LEDs are switched on,

the images on the parent unit will be displayed in black and white.

Attention: infra-red light cannot be perceived by the human eye; that means you

cannot tell whether the infra-red LEDs are switched on with the naked eye. De-

pending on the type of the infra-red LED, you might be able to see a red glow.

Multi camera / scan function (only when using multiple cameras)

Attention: when using multiple cameras, the unit will NOT automatically

switch to the camera where sound is being detected.

Refer to chapter 5 for registering additional cameras.

1. Shortly press the button

to view the images of the next camera

2. After all camera images have been shown, you’ll get the choice ‘SCAN’. This

means that the images of the next camera will be shown with intervals of

10~12 seconds

3. After pressing the button

, the images of camera 1 will be shown again.

– in the upper left corner of the display you can check which camera is being

shown.

– the unit will NOT automatically switch to the camera where sound is being

detected.

– when the unit switches to a camera that is not connected (camera is out

of range or switched off), then a black image will appear on the parent unit

during that period and the out of range tones will sound.

DVM-350-manual-NL-FR-D-GB-v1.0.indd 52 22-3-2016 15:01:55

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVM-350 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto DVM-350 Manual

Product: