668918

Alecto DVM-350 Manual

51
Zoom out
Zoom in
Previous page
1/60
Next page
51
USER’S MANUAL
4 USE
4.1 SWITCHING ON/OFF:
Baby unit:
• Slide the switch on the right side to ON to switch on the baby unit.
• Slide this switch to OFF to switch off the baby unit.
Parent unit:
• Shortly press and hold the button to switch on the parent unit.
• Shortly press and hold again to switch off the parent unit.
4.2 PARENT UNIT:
Reception volume:
• Repeatedly press the button to increase the reception volume.
• Repeatedly press the button to decrease the reception volume.
You can choose from 5 volume levels and volume off.
During the setup, the display will show the selected level.
Talking back:
• Press the button to talk back through the baby-unit (keep the button
depressed while talking).
The volume of the baby unit is a xed setting which you cannot change.
Zoom:
• Shortly press
and hold the button to zoom in.
• Shortly press the button and press the buttons , , and to view down,
up, to the left or to the right.
• Shortly press the button
-
to zoom out again.
Display on/off:
• Shortly press the button to switch off the display (the sound will continue).
• Shortly press the button again to switch the display back on.
This function is separate from the function for automatically switch off the display
and sound when your baby is sleeping. For this, refer to the user instructions
below.
Lullabies:
1. Shortly press the button to start the lullabies
2. Use the buttons and to select the desired song. You can choose from 5
songs, the selected song will continue and be played repeatedly.
3. After 15 minutes, playback of the lullabies will be stopped automatically or you
can manually stop the playback at any time to press the button .
The volume at the side of the baby unit is xed and you cannot change it.
Night light:
1. Press and hold the button to open the menu, now release this button.
2. Repeatedly press the button until ‘ ’ appears on the display, followed by
ON or OFF.
3. Press the button or to switch the night light on (‘ ON’) or off (‘ OFF’).
4. Shortly press the button to save the setting and to close the menu.
Brightness:
1. Press and hold the button to open the menu, now release this button.
2. The symbol will on the display, followed by the current setting.
3. Press the button or to set the brightness from low intensity ( ) to
high intensity ( ).
4. Shortly press the button to save the setting and to close the menu.
Don’t forget that a high intensity uses more power. When using the parent unit
with the built-in battery, please select a low intensity to prolong the battery’s life
span.
Temperature indication and warning:
The temperature of the room with the baby unit is shown above in the display of
the parent unit. You can select to show the temperature in degrees Fahrenheit or
in degrees Celsius. Besides that, you can let the unit sound an alarm tone when
the temperature in the baby room becomes too high or too low.
1. Press and hold the button to open the menu, now release this button.
2. Repeatedly press the button until ‘ ’ appears on the display, followed by °C
or °F.
3. Press the button or to switch between °C and °F.
4. Shortly press the button , ‘Lo’ will appear followed by the lower threshold
value for the temperature alarm.
5. Use the button or to set the lower threshold value (or select OFF if you
prefer not to set a lower limit).
6. Shortly press the button , ‘Hi’ will appear followed by the upper threshold
value for the temperature alarm.
7. Use the button or to set the upper threshold value (or select OFF if you
prefer not to set a lower limit).
8. Shortly press the button to save the setting and to close the menu.
As soon as the temperature becomes too low or too high, the unit will now sound
short alarm tones while the temperature display will start ashing on the display.
Don’t forget that the temperature is only an indication and you must take into
account a possible deviation of + or - 2 degrees.
DVM-350-manual-NL-FR-D-GB-v1.0.indd 51 22-3-2016 15:01:55
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DVM-350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVM-350 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info