368277
7
Zoom out
Zoom in
Previous page
1/8
Next page
7
Parent Unit
Press
at the Parent unit when lullaby is not being played.
Stopping the Lullaby Playing
Baby Unit
When lullaby is playing,
Press
to stop the Lullaby.
Parent Unit
When lullaby is playing,
Press
to stop the Lullaby.
Out of Range
When the baby and parent units have no link with each other (eg. Out
of range, parent unit or Baby unit is not powered on), the green Link
LED flashes. If there is no link for more than 30 seconds, the red Link
LED flashes and the green Link LED turns off. The link break alert will
also be emitted from the speaker of the Parent Unit every 30 seconds.
When the units are linked, the green Link LED will be steadily lit.
Note: Link break alert cannot be manually set on or off, but it can be
suppressed for 4 minutes by pressing any button.
There is only visual alert shown on the Baby Unit.
Low Battery
Baby Unit
When the unit is running on battery power and reaches low battery
level, the Low Battery LED will steadily turn on. Once the low battery
level is reach, the baby unit should still be able to operate for an hour.
Parent Unit
When the batteries on the Parent Unit reach a low level, the Low
Battery LED flashes. The low battery alert tone will be emitted from the
speaker every 60 seconds. Once the low battery level is reached, the
parent unit should still be able to operate for an hour. The low battery
alert message and alert tone will be turned off when fully charged
batteries are being replaced.
Note: Low battery alert can be suppressed by pressing any button.
Charging the Battery
Place the parent unit on its charge cradle to charge the battery. When
charging, the red LED on the charger will light steadily. The Low
Battery LED will be turned off.
Note: The Parent Unit must never be operated on the charging cradle
without batteries.
Restore to Default Setting
You can return the baby and parent units to factory default settings.
Press
to switch the unit off.
Press
again to switch the unit back on.
While the unit is switching on, press and hold
until you hear a
beep. The unit will restore all the original factory settings.
Note: If
is not pressed within 4 seconds, the unit returns to idle
mode.
If you want to restore the factory default settings on the baby
monitor, you will need to restore factory default setting on the
Baby Unit or on the Parent Unit individually.
Appendix: Default Settings
Baby Unit
Speaker Volume: Level 3
Lullaby: Lullaby 1
Parent Unit
Speaker Volume: Level 1
Speaker Sensitivity: Level 5
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto dbx-95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto dbx-95 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto dbx-95

Alecto dbx-95 User Manual - German - 20 pages

Alecto dbx-95 User Manual - Dutch - 20 pages

Alecto dbx-95 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info