368277
5
Zoom out
Zoom in
Previous page
1/8
Next page
5
Wall mounting the Baby Unit
Use the following wall mount template to locate and install the mounting
pins/screws if you prefer to wall mount your base unit. The dimensions
are shown in millimeters (mm).
1. Insert screws into the wall through the wall mount.
The recommended mounting screw size is diameter 3mm and
length 20mm,the diameter of the screw head and the screw should
not be greater than 7.55mm and 4mm respectively.
2. Put the base unit down into wall mount directly.
Note: Other wall mounting methods are not recommended and may
damage the product.
Power On/Off
Baby Unit
To switch on, press
. The Green Link light comes on to show
that the units are within range of each other.
To switch Off, press
until the display goes blank and the link
light goes off
Parent Unit
To switch on, press
. The Green Link light comes on to show
that the units are within range of each other.
To switch Off, press
until the display goes blank and the link
light goes off
Note: The parent unit can be used on or off the charging cradle. When
on cradle, the batteries will be recharged at the same time.
However, the time it takes to charge the batteries to full will be
longer when the unit is charged and used at the same time.
When off cradle, the batteries will lose charge over the time, even
if the parent unit is turned off.
Monitoring
Position the baby unit accordingly. It should be placed at least 1
meter away from the baby.
Take the parent unit to monitor.
Audio picked up by the baby unit microphone is depicted on the 7
LEDs on the parent unit (4 green and 3 red). The more audio is
picked up, the more LEDs will be lit. When no audio is picked up,
all 7 LEDs will be off.
If the volume of the Parent Unit is turned off, an alert will be sound
when the audio picked up reach the second red led.
Note: Do not position the baby unit and the parent unit close to each
other as a high-pitched feedback noise may be generated.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto dbx-95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto dbx-95 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto dbx-95

Alecto dbx-95 User Manual - German - 20 pages

Alecto dbx-95 User Manual - Dutch - 20 pages

Alecto dbx-95 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info