Manual Alecto DBX-68 (page 46 of 52) (English, German, Dutch, French)

707245

Zoom out

Zoom in

1/52

5.7 ECO / FULL ECO;

ECO:

In the ECO mode, the baby-unit is switched off while the baby is sleeping.

However, in the background the baby-unit regularly checks the connection

between the parent unit and baby unit. You’ll be notied if the connection is

lost.

FULL ECO:

In the FULL ECO mode, the baby-unit is also switched off while the baby is

sleeping and even the connection check is disabled. This means absolutely

no radiation when the baby is sleeping.

The baby unit activates as soon as the baby wakes up and starts making

noises.

Attention: keep in mind that in the FULL ECO mode, there’s no link-

check and therefore no alert tone when the connection between the

parent unit and baby unit is lost.

To set the ULL ECO mode on or off:

1. briefly press the button OF THE BABY-UNIT to activate the touch-

screen

2. press and hold the M button for 3 seconds to open the menu

3. press the M button 2 times shortly

4. use the and button to switch between ON (FULL ECO activated)

and OFF (FULL ECO disabled)

5. briefly press the M button to confirm you selection and to leave the

To check the link in between:

In the ECO or FULL-ECO mode you may briey press the TALK button in the

meantime to enable the sound (provided the volume is not set to 0) for about

10 seconds.

6 EXPANSION/NAME ASSIGNMENT

The DBX-68 is capable of registering up to 4 baby units. This way you

can monitor 4 babies and because you can assign an individual name to

each unit, you can directly determine which child is crying. Additionally,

for each baby unit you can set the talk-back function, feeding timer, room

temperature, lullabies and night light.

6.1 TO REGISTER & ASSIGN A NAME:

Attention: only during registration a name can be assigned to the

baby unit. If the baby unit is already registered and you only need

to adjust or set the name, you’ll only be able to this this by following the

registration process again.

When you’re only expanding your setup, ALL baby units must be registered

(again), i.e. also the baby units that were previously registered. However,

the names of baby units previously registered will remain in the memory.

preparation:

1. switch off the parent unit and the/all baby unit(s) by briefly pressing and

holding the button until the display is completely empty

parent unit:

2. press and hold the TALK button on the rear of the parent unit

3. now press and hold the button for approximately 3 seconds until the

parent unit turns on and P/PAIRING appears in the display with the P

flashing. Now release both buttons

first baby unit:

4. press and hold the button until first the baby unit switches on after

approx. 3 seconds and then ‘P’ starts flashing in the display after

another 2 seconds or more, now release the button

5. use the and buttons to select the respective baby unit (select ‘baby-

1’ for the first baby unit, ‘BABY-2’ for the second unit, etc.) and press

6. use the and buttons to select the first letter of the name and press

the M button

7. repeat this for all of the following letters (‘space’ is located directly after

the ‘ABC’, followed by the numbers 1 through 9. The name may consist

of a maximum of 8 characters)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DBX-68 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto DBX-68 Manual

Product: