707245

Alecto DBX-68 Manual

45
Zoom out
Zoom in
Previous page
1/52
Next page
45
5.4 TEMPERATURE ALARM:
The display of the parent unit shows the temperature transmitted by
the baby unit. You can assign a minimum or maximum temperature to
this function and have the unit sound an alarm when these values are
exceeded:
1. briefly press the button to activate the
touch-screen
2. press and hold the M button for 3 seconds to
open the menu
3. use the and buttons to select the option
TEMP ALARM
4. briefly press the M button
5. use the and buttons to select whether you
want to set or adjust the lower or the upper limit
6. briefly press the M button
7. use the and buttons to adjust the selected temperature limit and
briefly press the M button
8. repeat step 5-7 if you want to set the other temperature limit
9. briefly press the button to confirm the set temperature limits and to
leave the menu
• the upper limit can be set between -3°C and 50°C
• the lower limit can be set between -19°C and 3 degrees lower than the
upper limit
• select ‘‘OF” if you don’t want to set an upper or lower limit
• when the set temperature limit is exceeded, the temperature display will
start flashing while ‘TOO WARM’ or ‘TOO COLD’ is shown
• if the ALARM TONE function is activated, you’ll also hear short
notification tones
• don’t forget that the temperature display is only an indication, you’ll
have to take a tolerance of +/- 2°C into account
• at temperatures above 50°C and under -19°C, ‘- -‘ will appear in the
display
1
2
3
9
4
5
/
/
/
6
/
7
/
5.5 ALARM TONE:
You can set the unit to emit a clear alarm tone when temperature limits are
exceeded, when the battery is low or when the baby unit is out of range.
You can turn this function on or off as follows:
1. briefly press the button to activate the touch-
screen
2. press and hold the M button for 3 seconds to open
the menu
3. use the and buttons to select the option
ALARM TONE
4. briefly press the M button
5. use the and buttons to turn this function on
(ON) or off (OFF)
6. briefly press the button to confirm you selection and to leave
the menu
• will appear in the display when the alarm tone is switched off
• this setting only turns the alarm tone on or off; the alarm itself
is not changed
• when the alarm tone sounds, you can turn it off by briefly pressing
the button
5.6 VIBRATION FUNCTION:
In case of a little more background noise (e.g. noise while vacuum cleaning)
while there’s a chance that the sounds from the baby monitor cannot be
heard clearly, or in case the volume is switched off, you can enable the
vibration function:
1. briefly press the button to activate the
touch-screen
2. press and hold the M button for 3 seconds to open
the menu
3. use the and buttons to select the option
VIBRATION FUNCTION
4. briefly press the M button
5. use the and buttons to turn this function on
(ON) or off (OFF)
6. briefly press the button to confirm you selection and to leave the menu
• will appear in the display when the vibration function is switched on
1
2
3
6
4
5
/
/
/
1
2
3
6
4
5
/
/
/
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DBX-68 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DBX-68 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info