Manual Alecto COA1910 (page 61 of 68) (English, German, Dutch, French)

794845

Zoom out

Zoom in

1/68

The SA-100 is a smoke detector set for

discovery of ﬁre in the ﬁrst stage. If smoke

develops, the SA-100 will give a loud beep of at least

85dB (A). As part of the link function all the smoke

alarms within range will sound the alarm. We advice

to test the smoke detectors weekly using the test

button on the detectors. Save this manual in a safe

place or inside of the electricity meter cupboard.

RECOMMENDED INSTALLATION LOCATIONS

FOR THE SA-100:

• Install the ﬁrst smoke detector near the bedroom.

Ensure that it is placed so, if it would detect ﬁre, at

least one exit route would still be accessible. We

recommend to place one alarm near each poten-

tial blockade of your exit route, so you are alerted

before a ﬁre would block off escape.

• Use multiple detectors to increase safety and ensure

alert before the escape route is blocked.

• Install at least one smoke detector on each ﬂoor

of your house.

• Install at least one smoke detector in each room

where people smoke or where there is equipment

that may potentially cause a ﬁre.

• Smoke and heat will ﬁrst move upwards towards

the ceiling; after that the smoke and heat will

travel horizontally.

• Install the detector on the ceiling. Except for rooms

smaller than 1m, you should stay at least 50 cm

away from the wall and 61cm from any corner.

Smoke and heat do not gather in such corners,

preventing the detector from alerting you on time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto COA1910 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto COA1910 Manual

Product: