803285

Alecto BW-600 Manual

29
Zoom out
Zoom in
Previous page
1/46
Next page
29
Food warming:
1. Always place the basket into the bottle warmer rst before adding a jar. Do never place the
jar directly onto the heating element.
2. Fill the bottle warmer with water until the level of the nutrition in the jar. Regardless of the
amount of food, the water should not exceed the MAX level, indicated in the inner rim. It is
recommended to use distilled water, in connection with possible scale formation.
3. Turn the knob to select the function.The power light will alternately turn on and off. The
food is ready after about half an hour. It may take longer or shorter, depending on the type of
food, volume and material in which it is heated. The nal temperature may also vary slightly
due to different types of food, volumes and the material of the jar.
Note: It is normal that the indicator will alternately turn "on and off". The bottle warmer itself
will automatically adjust the temperature to ensure the heating food evenly.
Note: To warm completedly, make sure to stir the food from time to time.
Note: The food after warming should not be fed immediately.
4. Note there is no timer on the BW600BK. So count the time yourself and remove the bottle
from the bottle warmer after the indicated time has run out.
5. Gently stir the food and check the temperature before you are feeding the baby. Check the
temperature by feeling or tasting the food.
Tip: When you nd the food is not warm enough, place the food back into the basket for
maximum 0,5 min/1 min for extra warming. (Fill a small amount of water into the bottle
warmer when the water has dried out and then restart). This will cause a slightly warmer
result but without overheating.
Caution: If you leave the jar into the bottle warmer longer than one hour, the food may
become overheated. Cool the food before feeding.
Note: If you use overheated food, valuable nutrients and vitamins may be lost.
6. When the warming is completed, turn the knob to OFF.
Caution: The water in the bottle warmer may be hot after nishing the warming. Be
carefull the water can causes serious burns. If you do not turn the knob into to OFF
function, the water keeps heating up and will reach a very high temperature.
7. If the water has dried out, the reset switch will be triggered to shut off the power. Wait
10 minutes to cool down and then press the reset switch (until you hear a clicking sound)
restart the warming.
8. Before warming a second jar, it is best to wait 10 minutes for the bottle warmer to cool to
prevent overheating or pour cold water into the bottle warmer.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto BW-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto BW-600 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info