803285

Alecto BW-600 Manual

28
Zoom out
Zoom in
Previous page
1/46
Next page
28
Defrost/milk warming:
1. Always place the basket into the bottle warmer rst before adding a bottle/jar. Do never place
the bottle/jar directly onto the heating element.
2. Fill the bottle warmer with water until the level of the milk in the bottle or the nutrition in the
jar. Regardless of the amount of milk/food, the water should not exceed the MAX level,
indicated in the inner rim. It is recommended to use distilled water, in connection with
possible scale formation.
3. Turn the knob to select the function. The power light is alternately on and off. The
frozen milk or food is ready after about half an hour/hour, depending on the type of food,
quantity and material in which it is heated. The nal temperature may also vary slightly due to
different milk or formula volumes and the material of the bottle or jar.
Note: It is normal that the indicator will alternately turn "on and off". The bottle warmer itself
will automatically adjust the temperature to ensure the heating milk/food evenly.
Note: To defrost completely, shake the bottle or stir the food from time to time.
Note: The milk/food after defrosting should not be fed immediately.
4. Note there is no timer on the BW600BK. So count the time yourself and remove the bottle/jar
from the bottle warmer after the indicated time has run out.
5. Gently shake the bottle or basket and check the temperature before you are feeding the
baby. Check the temperature by sprinkling a few drops on the inside of your wrist. Or taste of
feel the food when it's not too hot.
Tip: When you nd the milk/food is not warm enough, place the bottle/jar back into the basket
for maximum 0,5 min/1 min for extra warming. (Fill a small amount of water into the bottle
warmer when the water has dried out and then restart). This will cause a slightly warmer
result but without overheating.
Caution: If you leave the bottle/jar into the bottle warmer longer than one hour, the
milk/food may become overheated. Cool before feeding.
Note: If you use overheated breast milk or nutrition, valuable nutrients and vitamins may be
lost.
6. When the defrosting is completed, turn the knob to OFF.
Caution: The water in the bottle warmer may be hot after nishing the defrosting. Be
carefull the water can causes serious burns. If you do not turn the knob into to OFF
function, the water keeps heating up and will reach a very high temperature.
7. If the water has dried out, the reset switch will be triggered to shut off the power. Wait
10 minutes to cool down and then press the reset switch (until you hear a clicking sound)
restart the warming.
8. Before defrosting a second bottle or jar, it is best to wait 10 minutes for the bottle warmer to
cool to prevent overheating or pour cold water into the bottle warmer.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto BW-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto BW-600 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info