626266
9
Zoom out
Zoom in
Previous page
1/18
Next page
9
GB
7. Arrow symbols
Toggle between the various tool fields by
using the up/down arrow symbols. Leave
the tool menu using the MENU button or
the return button.
8. Background lighting
Standby Screen can be set in three dier-
ent modes, Dark, Bright and Invert.
Dark: Turns o background lighting.
Press the screen or the menu button
when standby is activated and the screen
comes on, but returns to dark after
30seconds if the panel is not touched.
Bright: Background lighting in standby
mode.
Invert: Inverted background lighting in
standby mode.
Standby is activated automatically after
30 seconds if the panel is not touched.
Brightness can be adjusted in three steps
(1-3).
9. *EisEX, 12 V defroster for gas regulator
This is a little heating element that pre-
vents ice forming in the regulator in
winter (for Mono Control CS, DuoCon-
trol CS, DuoControl and DuoComfort). If
DuoControl CS or DuoControl is installed
and connected, symbols will be displayed
together with the gas bottle symbol in
the rest menu to show what has been
selected.
Snowflake = EisEX ON
Sun = EisEX OFF
10. *Load monitor
The function prevents the fuses on 230V
being overloaded. If the total current con-
sumption of the vehicle exceeds the set
value, the electrical output of the boiler
will be reduced automatically. This also
applies to Truma Comfort AC if connected
to Alde 3020. Due to voltage fluctuations
and tolerances, dierent regulation levels
can be selected (5-17 A). If the fuse blows,
choose a lower setting.
NB! For AC to function with the load
monitor. AC must be on from the panel
and not via the remote control
11. *Booster
Control of booster in two dierent
speeds. Fan start and stop is controlled
from the boiler. If the boiler’s circulation
pump starts up, the fan on the booster
will as well. When the circulation pump
stops, the fan will continue to run for
another six minutes and also stop unless
the circulation pump has started again,
i.e. giving automatic control of the boos-
ter fan.
12. *Floor heating
The function governs the underfloor
heating pump’s operation in intervals,
which means that the underfloor heat-
ing pump is in operation for 5 min
and is then o for 5 min when heat is
required.
Mode: Select whether Delay or Cont. is
activated, in these two modes under-
floor heating is switched on. In O
mode underfloor heating is o.
NB! In Cont. mode it can get hotter in
the vehicle than desired as the heat
control is turned o!
Delay : The underfloor heating pump
is on for a certain period after the
boiler’s circulation pump has stopped,
this Delay can be set at 15 min, 30 min
or 120min.
13. *Engine heater
The function makes it possible to use
the heating system to heat up the
engine in a motorhome, bus etc.
Engine heater start: Press the button
marked O, the text will change to On
and the button will turn green. Then
set the required starting time and day.
Engine heating starts at the set time
and day, heating is then active for 60
minutes and will stop automatically.
NB! The clock in the panel must be set
for the function to work.
14. Automatic temperature increase
(legionella)
The boiler will start at 02.00 in the
morning (if the clock is set) and run
as indicated for “More hot water” for
30 minutes (see section 5.2). This is to
reduce the risk of legionella.
15. Oset (temperature adjustment)
If the temperature that is displayed in the
panel does not correspond to the actual
temperature, it can be adjusted by ±5°C
in the panel.
Applies also to display of external tempe-
rature.
16. High altitude mode
The function only needs to be used if
the boiler will be powered by LP-gas at
a height above 1000m.
If the LPG burner runs unevenly at high
altitude (over 1000m), turn o the
boiler, see section 3 point 2, using the
On/O button and then start the boiler
with high altitude mode switched on.
NB! With LPG operation at high alti-
tude, use propane to obtain stable
combustion.
Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle
manufacturer’s instructions.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alde Compact 3020 HE - rev1504 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alde Compact 3020 HE - rev1504 in the language / languages: English as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alde Compact 3020 HE - rev1504

Alde Compact 3020 HE - rev1504 User Manual - German - 18 pages

Alde Compact 3020 HE - rev1504 User Manual - Dutch - 18 pages

Alde Compact 3020 HE - rev1504 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info