626269
15
Zoom out
Zoom in
Previous page
1/68
Next page
15
GB
9. The tool menu (functions)
When you are in the tool menu (see section 8), you can use the tools described below. Step between the various
tool fields by pressing the up or down arrow symbols. You can always leave the tool menu with the MENU button.
9.6 Service menus
1. Offset (temperature adjustment)
Using this function, you can calibrate the temperature on the panel if you
notice that the temperature (the stabilised room temperature) is not the same
as the temperature shown on the panel. This also applies to outdoor tem-
perature.
Automatic temperature increase (legionella)2.
At 02.00 at night (if the clock is set) the boiler starts and works according to
“Warm Water” (see section 5). This is in order to reduce the risk of legionella.
The function is disconnected in the factory setting.
Language3.
This function is used to reset the screen between different languages. Avail-
able languages are: English, French and German. On the other hand, the
service menu is only in English (see section 9.6).
External start4.
This function is used when starting the boiler from the outside, for example,
with GSM. When external start has been activated, the panel’s On/Off button
is switched off (see the assembly setting manual for external start). To use
this function, an external start installation is required (see vehicle, boat or
building manual).
Button sound1.
With this function, you can connect or disconnect the button sound.
The button sound is connected in the factory setting.
Tools / Key2.
Under Tools / Key you can lock or unlock access to the tool menu.
Luminance3.
The luminance can be adjusted between 1-10. The factory setting is 2.
Service1.
With this function, you can see certain values of the boiler on the screen.
The values are updated once a second
Resetting the system2.
Using this function, the boiler can be reset to the factory setting. After reset-
ting, the panel is set as follows: the boiler in Off mode, electrical operation
1kw, LPG heating in On mode and indoor temperature 22°C.
Other functions are disconnected.
OK3.
To leave the tool menu, press OK.
9.5
MENU
Reset
Service
OK
1
2
3
9.3
MENU
Ex t
Lan
2
1
4
3
9.4
MENU
1
2
3
MENU
Activated
Functions
MENU
Heater temp:
Sanitary temp:
MENU
Fan rotation: RPM
Current: A
Current:
Overheat: deact/act
Window switch:deact/act
Extern start: deact/act
MENU
Soft Rev.
Heater:
Panel:
CI Version:
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alde 3010 Control panel - Touch-Screen 413 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alde 3010 Control panel - Touch-Screen 413 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info