626269

Alde 3010 Control panel - Touch-Screen 413 Manual

14
Zoom out
Zoom in
Previous page
1/68
Next page
14
The tool menu (functions) 9.
When you are in the tool menu (see section 8), you can use the tools described below. Step between the various
tool fields by pressing the up or down arrow symbols. You can always leave the tool menu with the MENU button.
Arrow symbols1.
Step between the various tool fields by pressing the up or
down arrow symbols. You can always leave the tool menu with
the MENU button.
Clock2.
The clock must be set if automatic temperature change or automatic
start is to be used. If 12V voltage is lost, the clock will stop and will
no longer be displayed. This is prevented with an optional mounted
battery backup.
Automatic temperature change3.
This function is used when you want to programme a timed tempera-
ture change, for example, to have the heating temperature raised in
the morning and lower during the night.
Starting the boiler automatically4.
This function is used to start the boiler automatically at a later point
of time. With automatic start, the boiler works for 24 hours and then
stops. After that, it repeats the automatic start once a week; at the
same day and time, as long as the function is activated. For auto-
matic start to function, the On/Off button must be set in the OFF posi-
tion.
Load monitor5.
This function is used to prevent the 230V fuses being overloaded. If
the total power consumption of the vehicle, boat or building exceeds
the set value, the boiler’s power will be automatically reduced. On
account of voltage variations and tolerances, different setting levels
can be selected (for example, for 6A fuse, one can choose 6 or 7
Amp setting). If the fuse does not hold, choose a lower set value. The
function is disconnected in the factory setting. The load monitor has
to be installed for the function to be used (see the vehicle, boat or
building manual).
Constant pump operation 1.
With this function, the selected pump is constantly operating. The func-
tion is disconnected in the factory setting. This function limits access to
warm water, especially if not much heating is needed.
Pump Auto / 12V2.
In the Auto mode, the 230V pump operates, and when 230V is discon-
nected, the 12V pump starts. In 12V mode, the 12V pump is used even
if 230V is connected. The Auto function is activated in the factory set-
ting.
Pump speed 3.
The circulation pump’s capacity can be controlled from the panel. A
pump with this control must be installed in order that this function can
be used (see vehicle, boat or building manual). Available as from the
2010 model.
Remote indicator4.
This function is used in combination with a cylinder change over device
(Duocomfort) and indicates whether a LPG cylinder is empty.
The heating (Eis Ex) of the valve can also be controlled.
9.2
MENU
2
1
4
3
9.1
MENU
Amp
3
2
5
4
1
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alde 3010 Control panel - Touch-Screen 413 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alde 3010 Control panel - Touch-Screen 413 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info