1. FIRST USE
Your Versatis C650 is a DECT™* standard appliance designed to receive and transmit telephone calls.
The Versatis C650 is designed for connection to the public telecommunications network.
It requires an electrical power supply in order to function.
1.1 INSTALLING THE BASE
1.1.1 Precautions
As with all radio communications, the signal quality will depend on the location and environment of the base and handset.
Your DECT cordless telephone must be kept away from sources of excessive heat (radiators, direct sunlight, etc.) and
protected against vibrations and dust. Never allow your telephone to come into contact with water or other liquids, or with
aerosols.
To reduce the risk of interference and optimise reception, take particular care not to install the base in the immediate
vicinity of windows, large metal objects, reinforced concrete, televisions, music centres, halogen lamps or heating devices,
fluorescent lighting, burglar alarms, microwave ovens, computers, etc. If connecting your telephone to a line used by an
ADSL modem, remember to use an ADSL filter.
To clean your set, use an antistatic cloth lightly moistened with water.
1.1.2 Connecting the base
Connect the line cord and the power supply under the base, as shown.
Plug the telephone jack into the wall socket.
Connect the mains adapter to a 100/230 V / 50 Hz power supply.
After a few seconds, the base beeps to confirm the connection.
1.2 INSTALLING THE HANDSET
Fitting the batteries and charging up for the first time
Once the base is connected, insert the batteries in the compartment at the back of the
handset. Follow the signs telling you which way round the batteries go.
Place the handset on the base. The blue light on the base comes on.
4
The battery charging icon on the telephone appears.
Before using for the first time, we recommend that you leave the handset to charge up on
the base for 24 hours in order to optimise battery life and performance.
Check that the handset is registered on the base (icon not flashing) and take the line by
pressing .
The dial tone confirms that the Versatis C650 is working (if not, see Chapter 10).
!
When the telephone is on standby, press any key to activate the handset.
If you remove and replace the batteries, the handset will not restart until it has been placed back on its base
or charger.
!
For better listening quality, remove the protective film around the handset display(s) and earpiece(s).
2
* DECT is a registered trademark of ETSI.
Line
cord
Power
cable
