813385

Alcatel-Lucent IP Desktop Softphone for Alcatel-Lucent Communication Servers Manual

22
Zoom out
Zoom in
Previous page
1/56
Next page
IP Desktop Softphone (Windows) for Alcatel-Lucent Communication Servers
User manual – ALESVC56137 REL 15.0
Page 22 of 56
On this screen, initialize the available audio devices according to their purpose. The dropdown boxes in
this page list all the available audio devices. The table below explains the components of this screen:
Field Name/Icon Description
Loudspeakers
In this dropdown box, the audio device that you select will be utilized for phone’s output, and
is heard through speakers. One is required for the primary audio device and another one is
optional for the secondary audio device. You can test them by clicking the button in front of
this drop-down list
Use the button to stop the test.
Microphone
The audio device you select here picks up your speech and inputs into the phone.
The maximum audio recording level is displayed in real-time in the progress bar in front of this
drop-down list
The Microphone of the secondary audio device is used for hands-free mode.
“Acoustic echo
cancellation”
checkbox
This refers to the audibility of your voice in your earpiece. If you select this check box, echo is
controlled. Do not check this box if you are using a headset. The audio quality of your
equipment would be reduced. This option is only to select when you use Ip Desktop Softphone
with hands free.
“The ringtone will be
played on” checkbox Once you check it, you can see the phone’s output device you had chosen, replicated here.
This is the default value. If you do not want to use this, then uncheck the checkbox. If this
check box is not selected, the neighboring data are no longer displayed and in this case, you
must choose an output device for the ringing from the drop-down list next to the “And” label.
You can test them by clicking the button in front of this drop-down list . Use the button
to stop the test.
“Customize ringtone”
check box To customize your ringtones check this box, otherwise the Pabx ringtones will be played.
This function will be disabled if the cadence is enabled.
Ringtones Click on this button to select a ringtone for internal calls and one for external calls: either in
the drop-down list or by clicking the Browse button, the explorer window will open.
Then, select a .wav file. The phone uses this file while testing the audio properties.
The file you have selected is displayed next to this button.
For compatibility reasons, when personalized melodies (.wav) are chosen and Call Ringing
Cadences are programmed in the PABX system parameters, the ringtone may be altered or not
or played.
“Use System Volume”
check box To customize the volume level, you have either to check this box if you want to use system
volume, or uncheck it if you want to adjust the used volume level or mute it
Now you have completed the Audio configuration. Click OK/Apply to close this screen.
Note:
It is recommended to plug the headset before launching the IP Desktop Softphone and to launch the Audio
interface manually one time after the installation.
After that, the connection and disconnection of the headset is detected automatically. When a headset is
connected, the audio is sent in this device.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alcatel-Lucent IP Desktop Softphone for Alcatel-Lucent Communication Servers at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alcatel-Lucent IP Desktop Softphone for Alcatel-Lucent Communication Servers in the language / languages: English as an attachment in your email.

The manual is 2.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info