phone’s headset to another device with Bluetooth
TM
technology like the audio gateway BT 2000 set.
Starting Reset
• (1) Switch Your headset OFF with power switch (slide switch).
• (2) Switch Headset ON again
• (3) Press all 3 keys at headset together and keep them pressed for about 3 seconds. Hold
headset during that procesure near to Your ears. You will hear s short melody marking a
successful reset. If You should not hear the melody within 1-2 seconds, the reset was not
successful and You should repeat steps (1) to (3).
• (4) Release all buttons.
• (5) Switch the headset 1 x OFF and ON again at the slide switch (power off-on).
After reset of the headset You can now repeat the pairing procedure with Your mobile phone. The same
procedure applies for connecting with the audio gateway (BT 2000 set) for communication with corded phones.
Update hints: On our homepage you can find further information concerning
• Albrecht Bluetooth products
• Revised user manuals
• Technical documents
• Declaration of conformity
• List of countries with special regulations
Service-Hotline: (+49) 6103 9481 30
Service-Fax: (+49) 6103 9481 60
e- Mail: service@albrecht-online.de or service@alan-germany.com