228499
4
Zoom out
Zoom in
Previous page
1/7
Next page
charging station allowing one hour charging time before first use.
It can be useful to carry out the first charging at a 230V mains supply.
Charging starts the moment the headset is being placed in the charging station. 1.5 to 2.5 hours are being
needed to fully charge a completely empty BT 1000. The left indicator light gives you information of the state
of charging. (red = charging, green = battery full). With the headset switched on the indicator light will
be green when charging is finished, followed by a short red flashing once per second.
Operation at the 230V mains supply: Use the charging adaptor as a charging
station. Place the wall charger in a 230V socket and place the hollow plug in the
marked socket of the charging adaptor. (The top socket is blocked because it is
designed for a special adaptor for regular telephones that are not equipped with
Bluetooth
TM
technology and is not available in Europe).
You can reduce the charging time by switching off the Bluetooth
TM
headset
before charging (in direction of the arrow).
Connecting the mobile phone to your Bluetooth
TM
Headset
Your mobile phone can establish a connection that protects you from eaves-dropping. To do so the telephone
needs information to identify your Bluetooth
TM
headset as its exclusive partner. This procedure is called
„pairing“. This is very important because you don`t want any other Bluetooth
TM
headsets in your vicinity to
coincidentally be connected with your telephone or vice versa.
Pairing your mobile phone
Connecting of Bluetooth
TM
accessories with your mobile phone depends on the respective installation menue
of your mobile phone. Please refer to the operations manual of your phone. Read the instructions for the
pairing procedures, issued by the mobile phone manufacturers. You may also find the latest updated
instructions on the internet pages of the mobile phone manufacturers.
For pairing it is important to have the Bluetooth
TM
headset charged and ready to switch it on next to your
mobile phone.
Before registering your new Bluetooth
TM
headset at your mobile phone, the headset has to be prepared for
being connected to a mobile phone. This is being done by reset. The first step is to switch off the headset,
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Albrecht bt 1000 bluetooth at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Albrecht bt 1000 bluetooth in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Albrecht bt 1000 bluetooth

Albrecht bt 1000 bluetooth User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info