Manual Al-ko TWIN 11000-14000 (page 17 of 156) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian, Finnish)

601636

Zoom out

Zoom in

1/156

Startup

467 772_a 17

Automatic mode

1. In automatic mode, set the adjustable foot to

position "U" (bottom) to achieve the greatest

possible feed rate.

2. Insert the mains plug into the plug socket.

Models with float switch

3. Switch the operation selection switch on the

mains switch to "AUTO" (Fig. G).

Models with level switch

4. Slide the level switch upwards to the desired

switch-on height (Fig. I).

➯

The pump switches on automatically at a

specific water level (switch-on height) by

the float switch and when the water level

falls to the switch-off height it switches off

again, see technical data Page 5

Manual operation mode

In manual mode, the water can be pumped away

to a very low level of residual water.

Minimum water level for commissioning: see tech-

nical data.

Pumping out to residual water level

CAUTION!

Monitor the pump continuously when

pumping out to the residual water level

and avoid the pump running dry. Shut

the pump down when the residual wa-

ter level has been reached by switching

the operation mode selector switch to

"AUTO". The pumps switch on again au-

tomatically when the switch-on height is

reached.

Set the adjustable foot to the "O" (top) position for

pumping out to the residual water level:

1. Remove the mains plug from the plug socket.

Models with float switch

2. Switch the operation selection switch on the

mains switch to "MAN" (Fig. G). The pump

switches on and starts to feed.

Models with level switch

3. Slide the level switch upwards to the "MAN"

position (Fig. I).

ADVICE

If the water drops below the residual wa-

ter level, the pump will draw air in. In this

case, the pump must be vented when

the water level rises and before using it

again.

MAINTENANCE AND CARE

Cleaning the pump

ADVICE

After conveying chlorine-containing

swimming pool water or fluids that leave

a residue, the pump must be flushed out

with clear water.

1. Clean the suction slots on the suction foot if

necessary with clear water.

Removing/fitting the level switch

see Fig. H

1. Unscrew the fixing screw(2) and then first tip

the housing float switch(1) upwards and then

tilt to the front.

2. Clean the float body (4) and guides (3).

3. Place the float body back in the guide.

4. Replace the housing float body and push

downwards.

5. Screw the fixing screw in.

Removing/fitting the adjustable foot

TWIN pumps

see Fig. F

1. Unscrew the engaging screws (7) and pull the

adjustable foot (6) out of the pump housing

(8).

2. Clean the adjustable foot and the pump hou-

sing.

3. Insert the adjustable foot in the pump housing,

align and screw the engaging screws back in

place.

STORAGE

ADVICE

In the event of a risk of frost, the system

must be drained completely.

DISPOSAL

Do not dispose of old

equipment,batteries or accumulators

as householdwaste!

Product, packaging, and accessories

were made with recyclable materials, and

should be disposed of accordingly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko TWIN 11000-14000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko TWIN 11000-14000 Manual

Product: