Manual Al-ko TWIN 11000-14000 (page 16 of 156) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian, Finnish)

601636

Zoom out

Zoom in

1/156

Assembly

16 SUB 10000-13000 DS / TWIN 11000-14000

ASSEMBLY

Mounting the pressure line

TWIN pumps

see Fig. A

1. Screw the connection elbow (7) into the pump

outlet.

2. Screw the combination nipple (4) onto the

connection elbow.

3. Fix a hose to the combination nipple.

SUB pumps

see Fig. C

1. Screw the combination nipple (4) onto the

connection elbow.

2. Fix a hose to the combination nipple.

ADVICE

The combination nipple can be trimmed

to suit the selected hose connection. Use

the largest possible hose diameter.

Setting the adjustable foot

see Fig. E

TWIN pumps

1. Turn the adjustable foot (6) to the right.

➯

The adjustable foot disengages.

2. Set the adjustable foot to position "O" or "U".

3. Turn the adjustable foot (6) to the left.

➯

The adjustable foot locks back in posi-

tion.

SUB pumps

1. Turn the adjustable foot 90° to the left to move

the adjustable foot to the top position.

2. Turn the adjustable foot 90° to the right to

move the adjustable foot to the bottom posi-

tion.

ADVICE

The combination nipple can be trimmed

to suit the selected hose connection. Use

the largest possible hose diameter.

STARTUP

Safety

CAUTION!

Exclude, by suitable means, that, in the

event of a fault in the immersion pump,

consequential damage is caused by floo-

ding.

Make sure that the immersion pump is stan-

ding securely or operate the immersion pump

suspended from a rope.

Make sure there is adequate clearance under

the pump.

Never allow the immersion pump to run

against a closed off pressure line.

When using in shafts, make sure the size is

adequate.

Always cover the shaft with a secure foot-

plate.

Switching the pump on

see Fig. A - C

CAUTION!

The immersion pump must not draw in

any solid bodies. Sand and other abra-

sive materials in the conveying medium

will destroy the immersion pump.

1. Unwind the connection cable (1) completely.

2. Make sure that the electrical plug connection

is mounted in the area safe from flooding.

Models with float switch

3. Change the terminal position and adjust the

switching points of the float switch(10) indivi-

dually.

4. Attach the cable on the float switch to the

pump housing(4)securely.

➯

Recommended cable length on the float

switch approx. 100 mm

Models with level switch

5. Slide the level switch (8) to the relevant height

and thus set the switching points.

ADVICE

Use a suitable plate to ensure se-

cure mounting of the immersion

pump on muddy, sandy or stony

ground.

6. Immerse the immersion pump in the convey-

ing medium slowly. Hold the immersion pump

at a slight angle to allow any air to escape.

7. Insert the mains plug into the plug socket.

➯

The immersion pump switches on auto-

matically using the float switch when a

specific water level has been reached,

and switches off again if the water drops

below the switch-off height.

Switching the pump off

1 Remove the mains plug from the plug socket.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko TWIN 11000-14000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko TWIN 11000-14000 Manual

Product: