Manual Al-ko TCS Duotec 2500 (page 18 of 52) (English, German, Dutch, French, Italian)

601589

Zoom out

Zoom in

1/52

General points on shredding and composting

18 456251_a

draw chiefly from the soil. This extraction of food

is reduced to a minimum by the return of organic

humus naturally to the soil.

Organic fertilisers are decomposed in the soil by

bacteria, and are transfor med into the important

nutrients absor bed by the plants.

Humus regulates the water-balance in the fertile

topsoil, allows for sufficient aeration of the soil and

facilitates growth of roots.

Well-fertilised soil produces better growth and a

richer harvest. When used in conjunction with

good, systematic rotation, humus can in many ca-

ses prevent soil fatigue.

Proper shredding material

Organic substances, when shredded and mixed

into the soil, become biological fertilisers and

make excellent compost.

Organic substabce include e.g.: branches, twigs,

shrubs, flowerstalks, vegetable waste, leaves, pa-

per, cardboard ets.

ADVICE

Do not shred:

Roots of any kind with soil and sto-

nes attached (will damaged the cut-

ters), plastic materials, plastic bags,

glass, metal objects, bones, box-

wood, rags etc..

Garden waste with a high seed con-

tent is not suitable for suface com-

posting!

Feeding

Always switch on the motor prior to feeding mate-

rial into the shredder.

Use Top Feed for:

Twigs, branches, shrubs up to 13 mm Ø

Vegetable and flower waste, paper, card-

board

Paper and cardboard:

Do not fold too thickly when feeding into the

funnel. Should be fed in try.

CAUTION!

Remove metal clips and staples

from cardboard before shredding.

Do not feed in colour publication,

mail order catalogues etc., as these

contain substances which are unsui-

table for composting.

Garden and kitchen waste with a high water con-

tent, for example vegetable leaves, flowerstalks

etc. tend to stick, and can clog the ejector slot and

block the motor. Allowing waste of this kind to dry

for a few days will make shredding easier.

Several single twigs at a time may be fed in

through top funnel.

Use SIDE FEED for:

All branches up to approx. 35 (40) mm Ø.

Save the thinner twigs at the end of the

branch for top feed.

CAUTION!

When the cutters are sharp they

pull in the waste material with con-

siderable force, and thicker bran-

ches must befirmly held back to

avoid overloading the motor.

We recommend the wearing of gl-

oves and protective glasses while

shredding.

Twigs and branches should be shredded imme-

diately after cutting, while they are still full of sap

and we recommend either shredding dra material

from the time to time during this operation, or re-

serving the dry material until last.

This will absorb the moisture in the shredder and

clean the inside automatically. Do not however,

neglect to remove any residue from the shred-

der once the task is finished (First disconnect the

main plug).

If finer shredding is required, feed the material

through the funnel a second time.

ASSEMBLY

Leg assembly

Attach the legs to the housing

You will need:

2 legs

6 screws M8 x 35 (TCS Duotec 2500: 1of

which are already fitted to the machine)

6 washers 8,4 x 16 - DIN 125

6 nuts M8

4 washers 8,4 x 24 - DIN 9021

1 Place the machine on a suitable base. (eg a

table)

2 Open the shredder up.

3 Unscrew the nut M8 (1a).

4 Pull out the rod and take the upper part (1b).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko TCS Duotec 2500 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko TCS Duotec 2500 Manual

Product: