582879

Al-ko Robolinho 4000 Manual

35
Zoom out
Zoom in
Previous page
1/84
Next page
Mowing tips
455136_b 35
ADVICE
To allow the performance of the
Robolinho to be exploited to the full, we
recommend having the automatic lawn-
mower mow the lawn during cool times
of the day.
DANGER!
Danger of injury due to the cutting bla-
des!
Before all maintenance and care
jobs, always switch off the automatic
lawnmower using the [ON/OFF key].
Disconnect the transformer of the
base station from the mains.
Always wear work gloves when per-
forming maintenance and care jobs
on rotating and/or cutting tools!
SETTING THE CUTTING HEIGHT
1. Select [Setting the cutting height].
2. Select [Cutting height] with the [arrow keys]
(3-3) in 5 mm steps and confirm with the [mul-
tifunction key right] (3-5).
3. Confirm the selection with the [menu key]
(3-8) and return to the main menu.
➯
The blade plate does not move to the set
cutting height until the Robolinho starts
to mow.
ADVICE
The cutting height varies in the range
from 3 - 6 cm lawn height. It can be ad-
justed in five steps of 5 mm each.
BATTERY
The integrated battery is partially charged on
delivery. During normal operation, the battery
of the Robolinho is regularly recharged.
When the battery charge reaches 0%, the
Robolinho automatically returns to its base
station in order to charge the battery.
➯
Interrupting charging does not damage
the battery.
The base station is equipped with an elec-
tronic control unit with a monitoring function.
This automatically terminates the charging
procedure when a 100% charge status is re-
ached.
The battery status is shown on the display.
Make sure the charging contacts (10-1) of the
base station have adequate contact with the
contact surfaces (10-2) on the Robolinho.
The temperature range for charging should
be between 0 and 40 °C.
The built in protection circuit prevents the
battery from being charged at temperatures
above 45 °C, in order to prevent irreparable
damage to the battery.
If the operating time of the battery is reduced
in spite of it being fully charged, have the bat-
tery replaced by a new genuine battery. This
task should be carried out by an AL-KO dea-
ler, technician or service partner.
If the battery charge level has dropped be-
low the threshold set by the manufacturer as
a result of ageing or excessively long storage,
this means it cannot be recharged any longer.
Have the battery and the monitoring electro-
nic control unit checked by an AL-KO dealer,
technician or service partner, and renew it if
necessary.
The battery status is shown on the display.
Check the battery status after about 3 months
by switching on the Robolinho and reading off
the battery status. If necessary, place it in the
base station for charging.
In case of leakage of electrolyte must be rin-
sed with water / neutralizer. In case of contact
with eyes, so a doctor should be consulted.
MAINTENANCE
CAUTION!
Before performing any maintenance
STOP button!
DANGER!
Danger of injury due to the cutting bla-
des!
During transport, always keep the cutting
blade plate facing away from your body.
Check Robolinho, base station and cable re-
gularly for damage
Have damaged parts and batteries replaced
or repaired by an AL-KO dealer, technician or
service partner
Transport
Only carry the Robolinho by its deck.
Stop the Robolinho using the [STOP key]
(3-2).
Switch off the Robolinho using the [ON/OFF
key] (3-7).
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko Robolinho 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Robolinho 4000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info