582879
27
Zoom out
Zoom in
Previous page
1/84
Next page
Product overview
455136_b 27
PRODUCT OVERVIEW
The product overview (2) provides an overview of
the machine.
2-1 Charging contacts
2-2 Bumper
2-3 Deck
2-4 Operating panel (under cover flap)
2-5 STOP key
2-6 Front rollers (steering)
2-7 Blade plate
2-8 Drive wheels
2-9 Cutting blade
2-10 Clearer blade
2-11 Fastening screw
DESCRIPTION OF FUNCTION
The Robolinho is a fully automatic, bat-
tery-operated lawnmower which moves freely
within a defined mowing area.
The mowing area is defined by a boundary
cable that is connected to the base station.
In order for its battery to be recharged, the
Robolinho moves along the boundary cable
into the base station.
Mowing programs are pre-installed for mo-
wing, and also include the lawn and edge mo-
wing function. These mowing programs can
be changed.
The special arrangement of blades means
that the mown grass is not gathered up but
remains on the lawn between the stalks of
grass. As a result, it has a mulching or fertili-
sing effect.
SENSORS
The Robolinho is equipped with various safety
sensors (9).
Lifting sensor
If the Robolinho is lifted up by its deck during
operation, a sensor stops the blade within 2
seconds and switches off the travel drive.
Bump sensors and obstacle detection
The Robolinho is equipped with sensors that
ensure it changes its direction of travel if it
encounters obstacles. When it encounters an
obstacle, the top part of the deck (9-1) is shif-
ted slightly. This causes a sensor to trigger a
change in the direction of travel.
Tilt sensor in direction of travel
The Robolinho is switched off by the tilt sen-
sor if it encounters an upward or downward
slope of more than 35%.
Tilt sensor on side
The Robolinho is switched off by the tilt sen-
sor if it encounters sideways slopes of more
than 35%.
Rain sensor
The Robolinho is equipped with a rain sen-
sor that interrupts the mowing procedure in
case of rain, and ensures that the Robolinho
returns to its base station.
ADVICE
The Robolinho does not restart automa-
tically after being switched off by a safety
sensor. To restart, it is necessary to ack-
nowledge the fault by pressing the multi-
function key and rectifying the fault.
TRANSFORMER
The transformer generates the electricity for the
base station.
WARNING!
Damage due to splash water!
Set up the transformer in a dry place
where it is protected against splash wa-
ter.
We recommend the connection via a
earth leakage circuit breaker (ELCB)
with a rated leakage current < 30 mA!
ASSEMBLY
ADVICE
It is essential to comply with the se-
quence described here
CAUTION!
Danger - risk of injury!
Always ensure stability when working!
Wear work clothing and protective gear.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko Robolinho 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Robolinho 4000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info