Manual Al-ko Motorhacke AL-KO MH 4001R (page 12 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

601545

Zoom out

Zoom in

1/88

Translation of original user instructions GB 2

Store fuel only in containers specifically designed

fort he storage of such materials.

Add fuel outdoors only. Do not smoke when

fuelling!

Never open the cap of the fuel tank, or add fuel,

while the engine is running or the unit is hot.

Always use a funnel or a filling pipe for adding

fuel to avoid the spilling of the fuel onto the

engine, the cover ort he ground.

If the fuel overflows the engine must not be

started. The unit is necessary to be cleaned. In

no case the unit is allowed to be started until the

petrol vapours disperse.

For security reasons always replace the fuel tank

and its cap when being damaged.

Risk of burning injuries!

The exhaust pipe and parts close to it may

be hot up to 80°.

Replace the damaged parts of the exhaust pipe.

Do not change the setting of the engine regula-

tor.

Never run the internal-combustion engine inside

a closed room – intoxication risk!

Spare parts and accessory

Only use the original spare parts and original

accessory.

The producer reserves all rights to change the

construction or configuration.

Safety symbols on the unit

Read the operating instructions

before operating the unit.

Rotating unit. Keep hands and

feet from the unit.

Use

Designated use

This unit is determined for processing in advance

hoed soil.

The unit is not suitable to process the solid soil,

e.g. firmly down-trodden lawn.

Other use of this device with original accessories

is allowed only for the determined purposes.

Operating times:

Please observe the operating hours permitted

locally.

Assembly

The assembly of this machine – see the figures

1 - 16.

Parts description

1 Clutch lever

2 Throttle lever

3 Lever for reverse gear

4 Starter rope

5 Transport wheel

6 Chopping knife

7 Protective glass

8 Guard

9 Brake spur

Putting into Operation

Put the machine into operation only after its

complete assembly.

Tank Oil and Petrol before the First Putting

into Operation! It is necessary to respect

unconditionally instructions in enclosed

operating instructions for petrol engine

delivered by engine producer.

Setting-up of Handle Height

Set-up handle height according to your proper

body size.

Common setting-up of height corresponds to

haunch height.

 Loose screws on cover support.

 Set-up handle height according to long

holes.

 Tighten screws.

With the models with reverse gear

(MH xxxx R) the guide handle can be

swung to the left and right.

 Loosen the star knob (Fig. 14), swing the

guide handle to the side and tighten the star

knob manually.

Transport Wheel

Motor cutter can be transported to given place by

means of transport wheel.

To work with the motor-driven weeder, remove

the transport wheel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Motorhacke AL-KO MH 4001R in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko Motorhacke AL-KO MH 4001R Manual

Product: