Manual Al-ko HW F 1004 (page 12 of 120) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish)

601989

Zoom out

Zoom in

1/120

Checking the inlet pressure

• Prior to installing the filter, check the two

seals (21) on the filter and the seal (16) for

damage, if necessary renew.

• Unplug the electric cable from the socket.

• Open the pressure line and drain the water

off until the pump is completely empty.

The seal (25) must be correctly inserted in

the seal seat on the pump head (see Detail

in Fig. C). If necessary lightly grease the

seal with non-acidic fat.

• Check the inlet pressure at the diaphragm

(5).

• The pressure should be approx. 1.5 bar.

Correct the pressure if needed.

• Install the filter, screw on filter cover and

tighten firmly with the hand using filter span-

ner.

• Put the domestic water system into operation

as set out in the instructions.

Disposal

Removing and mounting of non-return

valve, cleaning

RL 2002/96 EG

Do not dispose of worn-out units

through the household garbage!

The appliance, its packaging and

accessories are all produced

from recyclable materials and

must be disposed of accordingly.

• Remove the filter (see Section "cleaning the

filter").

• Unscrew the non-return valve (23) and clean

it under flowing water.

• Renew seal (24) if necessary.

• Install the non-return valve.

• Install the filter and filter cover.

Frost protection

Your domestic water system is susceptible to low

temperatures. Make sure to empty the device of

residual liquid (hoses, pump and reservoir) and

store it so that it is protected from frost.

• Empty the suction and pressure hoses.

• Remove the draining screws (9) and (12)

drain all water from the pump chamber. The

water contained in the reservoir will be

pressed out by the air bellows.

• Replace the draining screws and store the

device so that it is protected from frost.

Setting the pressure switch

The cut-in and cut-out pressures at which the

sys- tem starts and stops operating have been

set in the factory (see technical data). However,

if desired, you can adjust the setting as desired

at the pressure switch (10).

Settings on the pushbutton switch and on

the electrical part of the house water plant

may be performed only by the responsible

customer service.

Translation of original user instructions GB 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko HW F 1004 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 3,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko HW F 1004 Manual

Product: