Manual Al-ko HW F 1004 (page 9 of 120) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish)

601989

Zoom out

Zoom in

1/120

Introduction

Please read the operating instructions carefully

before you use the domestic water system to

prevent accidents and ensure the trouble-free

operation of the system. Make sure you keep the

instructions at hand for quick reference. If you

resell your pump or give it to another user, plea-

se include these instructions in the sale or the

gift. The following symbols are used in the in-

structions:

DANGER

This symbol draws your attention to work

processes or operating procedures that

have to be carefully observed in order to

prevent serious injury to the user or an-

other person.

CAUTION

This symbol draws your attention to infor-

mation you need to ensure that your

system is not damaged due to improper or

careless use.

PLEASE NOTE

The information symbol draws your atten-

tion to essential technical requirements.

For your safety

The domestic water system may only be

connected to an electrical device which is

compliant with DIN/VDE 0100, Parts 737,

738 and 702 (swimming pools). Make sure

that fuse protection in the form of a 10 A

automatic cut-out and a fault current guard

circuit with a nominal fault current of

10/30 mA is installed.

The supply voltage and current specified

on the type plate must be identical with the

voltage and current of your electrical

system.

If you need to connect your domestic water

system to an extension cord, make sure

that the cable is 3 x 1.5 mm

, which it

corresponds to type H07RN-F and is

compliant with DIN 57282/57245. The

connector must be splash-proof. Cable

drums must be completely unwound.

Please make sure that the system is not

operated by anyone

− who has not read or does not fully

understand the operating instructions

− is under the age of 16.

The domestic water system may not be

used for any other than its designated use.

Before putting the system into operation,

make sure that

− the pump, reservoir, the electric cable

and the plug are not worn or dam-

aged.

Do not operate the system if it is dam-

aged. Necessary repairs must be carried

out in a qualified AL-KO service centre.

Never use the electric cable to lift, carry or

attach the system to another object. Do not

pull on the cable when unplugging the

system.

Make sure that the system is unplugged

before beginning any maintenance, repair

or cleaning work. In the event of a malfunc-

tion, immediately unplug the system. Make

sure that the plug does not get wet.

Do not attempt to make any changes or

modifications to the device by yourself.

You may endanger your life or invalidate

the warranty.

Risk of injury due to hot water!

The water in the pump can heat up signifi-

cantly, during longer periods of operation

(>10 min) against closed outlet side.

This hazard can occur due to:

− side under compression closed

− water shortage in the suction line

− improper installation

− faulty pressure switch

In this case:

− isolate the pump from the mains

− allow the pump and water to cool down

− check water level on inlet side

− check lines for tightness

− check installation

− check pressure switch

− only restart pump after rectifying the

cause of the fault

GB 1 Translation of original user instructions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko HW F 1004 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 3,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko HW F 1004 Manual

Product: