594634
15
Zoom out
Zoom in
Previous page
1/96
Next page
Safety instructions
474833_a 15
Switch off the blade drive when moving outs-
ide the mowing area.
Do not place your hands and feet close to any
rotating parts.
Only control the machine using the handle-
bar. This ensures the necessary safety cle-
arance.
Always ensure stability when working.
Keep exhaust and engine clean.
CAUTION!
Danger of fire!
Remove flammable objects from the ex-
haust and the cylinder area.
If working on slopes:
Never work on a smooth and slippery
slope.
Always make sure you are positioned se-
curely.
Always work across the slope, never up-
ward or downward.
Do not work on slopes with a more than
10° gradient!
Take particular care when turning!
Do not leave the appliance unsupervised.
Before leaving the equipment unattended:
Turn the engine off
Wait for the cutting unit to stop
Remove the spark plug connector
Do not change the engine governor settings.
SAFETY INSTRUCTIONS FOR THE
SCYTHE ATTACHMENT
Some of the blades on the scythe attachment are
exposed. These represent a significant risk of in-
jury in case of lack of care during handling.
Always put on the guard bar for the scythe attach-
ment under the following circumstances:
Installing the scythe attachment on the mo-
wer
Cleaning the machine
Transport and storage of the mower
Assembly work on the scythe attachment
Renewing damaged guard bars
FUEL AND OPERATING FLUIDS
WARNING!
Fire danger! Petrol is highly flammable!
Store petrol in designated containers only.
Only refuel in open air.
Never smoke while refilling!
Use a funnel or a filler pipe when refuelling so
that no fuel is spilled on the engine, the deck
or the ground.
Do not open the tank cap while the engine is
running or if the machine is hot.
Replace a damaged petrol tank and/or tank
cap.
Renew exhaust silencers if damaged.
If petrol has been spilt:
Do not start the engine
Do not start the equipment
Clean the equipment.
CAUTION!
Danger of burns!
Running engines generate heat. Parts of
the engine, especially the exhaust, get
extremely hot.
WARNING!
Never leave an engine running in an en-
closed space. Toxic hazard!
ASSEMBLY
CAUTION!
The machine must not be put in opera-
tion before it has been assembled com-
pletely.
Assemble this mower in accordance with the se-
parately enclosed assembly manual.
STARTUP
Initial commissioning
ADVICE
Numbers in italics, e.g. (2-1), refer to the
figures.
WARNING!
Petrol engine: Fill with oil and petrol be-
fore taking into operation for the first
time!
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BM 875 III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BM 875 III in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info