601594
43
Zoom out
Zoom in
Previous page
1/448
Next page
Maintenance of Saw Chain and Guide Bar
441 076_b 43
4. Sprocket
Check for cracks and for excessive wear interfering with the chain drive.
If the wear is considerable, replace it with new one. Never fit a new
chain on a worn sprocket, or a worn chain on a new sprocket.
5. Front and Rear dampers
Replace if adhered part is peeled or crack is observed on the rubber
part. Replace if the inside of the rear damper metal has been beaten by
the stopper bolt and the clearance of the metal increased.
WARNING!
Use only the spare parts which named in this manual. Use the
other spare part can cause serious injury.
MAINTENANCE OF SAW CHAIN AND GUIDE BAR
Saw chain
WARNING!
It is very important for smooth and safe ope-
ration to keep the cutters always sharp.
Your cutters need to be sharpened
when:
Sawdust becomes powder-like
You need extra force to saw in
The cut way does not go straight
Vibration increases
Fuel consumption increases.
Cutter setting standards:
WARNING!
Be sure to wear safety gloves.
Before filing:
Make sure the saw chain is held securely.
Make sure the engine is stopped.
Use a round file of proper size for your chain.
Chain type:
BKS 3835: Oregon 91P
BKS 4040: Oregon 91P
File size: 5/32”(4.0mm) for 91P Place your file on the cutter and push straight forward. Keep the file
position as illustrated.
After every cutter has been set, check the depth gauge and file it to the proper level as illustrated.
WARNING!
Be sure to round off the front edge to reduce the chance of kickback or tie-strap breakage.
Make sure every cutter has the same length and edge angles as illustrated.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BKS 4040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BKS 4040 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info