601594
41
Zoom out
Zoom in
Previous page
1/448
Next page
Maintenance
441 076_b 41
Pruning
Cut up from the bottom, finish down from the top.
WARNING!
1 Do not use an unstable foothold or a stepladder.
2 Do not overreach.
3 Do not cut above shoulder height.
4 Always use both hands to grip the saw.
WARNING!
The Spiked bumper must always be put on while using the chain
saw on tree trunk. Push the spiked bumper into the tree trunk by
using the rear handle. Push the front handle in the direction of
cutting line. The spiked bumper must be remaining set for further
saw guiding if necessary. Use a spiked bumper when cutting
trees and thick branches can ensure your safety and decrease
the working strength and vibration level.
If there’s barrier between the cutting material and chainsaw, turn
off the machine. Wait until it stops completely. Wear the safety gl-
ove and remove the barrier. If the chain must be removed, please
follow the instruction of relevant part like installation in manual.
A trial run must be conducted after the cleaning and newly in-
stallation. If vibration or mechanical noise is discovered, please
stop the use and contact your dealer.
MAINTENANCE
WARNING!
Before cleaning, inspecting or repairing your unit, make sure that
engine has stopped and is cool. Disconnect the spark plug to
prevent accidental starting.
Follow the instructions to carry out regular maintenance, pre-operating
procedures and daily maintenance routines. Improper maintenance may
result in serious damage to the machine.
Maintenance after each use
1. Air filter
Dust on the cleaner surface can be removed by tapping a corner of the
cleaner against a hard surface. To clean dirt in the meshes, split the
cleaner into halves and brush. When using compressed air, blow from
the inside. To assemble the cleaner halves, press the rim until it clicks.
2. Oiling port
Dismount the guide bar and check the oiling port for clogging.
(1) Oiling port
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BKS 4040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BKS 4040 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info