603978

Al-ko BC 225 L Manual

19
Zoom out
Zoom in
Previous page
1/264
Next page
Translation of the original operating instructions
20
BC 225 B assembly
Parts overview (Fig. 1)
1 String head
2 Drive shaft
3 Guard
4 “Bike” grip
5 Lever, see Starting the engine
Caution!
The machine must not be operated before assembly
work has been completed.
„Bike“ grip (Fig. 2) (Fig. 3)
1. Place the rubber sleeve over the support bar.
2. Screw together the lower brace and the grip holder
over the rubber sleeve using the four Allen screws.
3. Place the grip rod into the grip holder.
4. Fasten the upper brace onto the grip holder using the
four Allen screws.
Mounting the cutting blade (Fig. 5)
1. Place the drive plate onto the guide pin on the drive
shaft.
2. Place the cutting blade onto the drive plate so that the
hole in the cutting blade is positioned precisely on the
guide circle on the drive plate.
3. Pushtheangeontothecuttingbladesothattheat
side faces the cutting blade.
4. Fit the fan washer.
5. Secure the clamping nut onto the guide pin. To do
this, insert the Allen key into the relevant holes and
tighten using the spark plug wrench provided. Cauti-
on: left-hand thread!
6. Secure the nut with the cotter pin.
Mounting the guard (Fig. 6)
1. Fix protection cap with medium screw on the hand-
lebar.
2. Protective cover with the remaining two hex screws
and hex nuts tighten.
Mounting the string head (Fig. 7)
BC 225 L assembly
Parts overview (Fig. 1)
1 String head
2 Driver
3 Guard
4 „Bike“ grip
5 Lever, see Starting the engine
Caution!
The machine must not be operated before assembly
work has been completed.
Mounting the L grip (BC 225 L) (Fig. 2)
1. Place the rubber sleeve over the support bar.
2. Screw together the lower half of the grip and the top
half above the rubber sleeve using the four Allen
screws.
Mounting the guard (BC 225 L) (Fig. 3)
1. Fix cover and mounting sleeve with the center hexa-
gon socket screw on the stem and tighten.
2. Screw protection cover with the remaining two hexa-
gon socket screws
Mounting the string head (BC 225 L) (Fig. 4)
1. Hold the driver disc with your hand.
2. Screw the string head onto the guide pin.
Caution: Left-hand thread.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BC 225 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BC 225 L in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info