161790
4
Zoom out
Zoom in
Previous page
1/11
Next page
3
dx turntables
dx turntables
PART NAMES AND FUNCTIONS
english
1) START/STOP Use this to change the speed of the platter when the PITCH indicator
Press this button to start or stop the platter. is NOT lit.
2) PLATTER 11) TONE ARM
This is a fully manual tone arm. To start playback, gently place the
3) MOTOR OFF stylus on the record using the headshell finger support. Do not drop
Press the button to enable motor off, and the led will be flash the stylus onto the record as it may cause damage to the diamond
Press the button again to disable function. tip and to the record.
4) TARGET LIGHT 12) 45 RPM ADAPTOR
Insert target light to the deck and it will light up. Place on centre spindle fo ecords with large centre holes.
5) PLATTER REVOLUTION SPEED BUTTONS 13) ANTI SKATE KNOB
33 rpm press 33 When a record is playing, a force is generated drawing the stylus
45 rpm press 45 towards the centre of the record. Set this knob to the same value as the
78 rpm press 33 and 45 stylus pressure to offset this force.
6) REVERSE 14) COUNTER WEIGHT
This button is used to reverse the direction of the platter rotation. Use this to balance the tone arm and to adjust the stylus pressure.
7) +/-8%,+/-12%,+/-20% 15) POWER SWITCH
Press the button to switch to 8%, press again to switch to 12%, and This switch turns the power on or off, including the motor and audio
again to 20%. signal.
8) QUARTZ LOCK 16) POWER CORD CONNECTOR
On will hold the revolution speed to 0%. Used to connect the included power cord.
Off will allow use of the pitch adjust.
17) OUTPUT SIGNAL SELECTOR
9) HEADSHELL LOCKING NUT Two forms of output audio signal are available: Phono and Line.
Attach the headshell by inserting into the front end of the tone arm,
then turn the locking nut clockwise with the head shell firmly held 18) AUDIO OUTPUT CONNECTOR
horizontally. This is the audio output connector (RCA). Must be connected as
explained at Connections part of this manual.
10) PITCH SLIDER
r playing 7” r
1
1
4
5
76 8
14
13
12
11
10
9
2
3
18
1716
15
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akiyama dx 303 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akiyama dx 303 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info