161791
5
Zoom out
Zoom in
Previous page
1/11
Next page
4
17. HEADSHELL - Install cartridge here. When installing a cartridge, refer to the
installation instructions supplied by the manufacturer of that cartridge. During
installation, attach the stylus protector to guard the stylus tip from damage.
Attach wires as follows:
White (L+) Left channel+
Blue (L-) Left channel -
Red (R+) Right channel+
Green (R-) Right channel-
18. S-SHAPED TONE ARM
19. TONE ARM LEVER Controls the up and down action of the tone arm lift.
20.ANTI-SKATE CONTROL This applies inward force to the tone arm so it
doesn't skip outward across the record due to the centrifugal force of the record
spinning. Cartridge manufacturers usually specify the proper setting of this.
21. COUNTERWEIGHT Adjustment creates the proper downward pressure of
the stylus to the record. Attach now by sliding the counterweight onto the rear of the
tone arm. Twist it lightly and it will screw onto the rear shaft of the tone arm.
TONE ARM ASSEMBLY
1. Push the power to on and the speed indicator and the stylus 9. Set the cueing lever to the down position, the tone arm will descend
illuminator will light up. slowly onto.
The record and play begins.
2. Insert target light for illumination the stylus.
10. Set the desired pitch adjusts range by depressing the buttons until
3. Place a record on the turntable mat. When playing a 45rpm record the desired pitch is reached.
with a large centre hole; place the 45rpm adapter on the centre Options are +/-10%.
spindle.
11. Adjust the pitch to a desirable speed.
4. Set the rotation speed (33/45/78) to match the record.
12. To suspend play, lift tone arm with cueing lever.
5. Release the arm clamp.
13. When play is finished, raise the cueing lever, move the tone arm to
6. Set the cueing lever to the up position. the armrest and secure the tone arm with the arm clamp.
7. Press the Start/Stop button and the turntable platter will start to 14. Press the Start/Stop button to stop the platter rotating.
rotate.
15. Push the power to off.
8. Move the tone arm over the desired groove.
OPERATION
21
19
18
20
17
dx turntables
english
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akiyama dx 202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akiyama dx 202 in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info