161791
4
Zoom out
Zoom in
Previous page
1/11
Next page
3
dx turntables
dx turntables
PART NAMES AND FUNCTIONS
1. START/STOP 9. TONE ARM
Press this button to start or stop the platter. This is a fully manual tone arm. To start playback, gently place the
stylus on the record using the headshell finger support. Do not drop
2. PLATTER the stylus onto the record as it may cause damage to the diamond
tip and to the record.
3. MOTOR OFF
Press the button to enable motor off, and the led will be flash . 10. 45 RPM ADAPTOR
Press the button again to disable function. Place on center spindle for playing 7” records with large center holes.
4. TARGET LIGHT 11. ANTI SKATE KNOB
Insert target light to the deck and it will light up. When a record is playing, a force is generated drawing the stylus
towards the center of the record. Set this knob to the same value as the
5. PLATTER REVOLUTION SPEEDS (rpm) stylus pressure to offset this force.
33 rpm Press 33
45 rpm Press 45 12. COUNTERWEIGHT
78 rpm Press 33 and 45 buttons simultaneously. To return to 33 or Use this to balance the tone arm and to adjust the stylus pressure.
45rpm play mode, just press the desired button.
13. POWER SWITCH
6. REVERSE This switch turns the power on or off, including the motor and audio
This button is used to reverse the direction of the platter rotation. signal
7. HEAD SHELL LOCKING NUT 14. POWER CORD CONNECTOR
Attach the headshell by inserting into the front end of the tone arm, Used to connect the included power cord.
then turn the locking nut clockwise with the head shell firmly held
horizontally. 15. GND
Ground wire connection post
8. PITCH SLIDER
Use this to change the speed of the platter when the PITCH indicator 16. PHONO OUTPUT
is NOT lit. This is the standard analog output (RCA jacks) which can be
connected to phono input on any DJ mixer.
1
1
4
5
6
9
8
7
2
3
16
1514
13
english
12
11
10
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akiyama dx 202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akiyama dx 202 in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info