515810
40
Zoom out
Zoom in
Previous page
1/56
Next page
40
Model No: AC -S24CK_S24HK
Version 1.0
l Close the valve (Low side) on the charge set, turn off the vacuum pump, and
confirm that the gauge needle does not move (approximately 5 minutes after
turning off the vacuum pump).
l Disconnect the charge hose from the vacuum pump.
F If the vacuum pump oil becomes dirty or depleted, replenish as needed.
6. GAS CHARGING (AFTER EVACUATION)
l Connect the charge hose to the charging cylinder.
F Connect the charge hose which you disconnected from the vacuum pump to the
valve at the bottom of the cylinder.
F If you are using a gas cylinder ,also use a scale and level the cylinder so that the
system can be charged with liquid.
l Purge the air from the charge hose.
F Open the valve at the bottom of the cylinder and press the check valve on the
charge set to purge the air.(Be careful of the liquid refrigerant).The procedure is
the same if using a gas cylinder.
l Open the valve (Low side on the charge set) and charge the system with liquid
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akira AC-S24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akira AC-S24 in the language / languages: English as an attachment in your email.

The manual is 6,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info