630521
10
Zoom out
Zoom in
Previous page
1/64
Next page
10
Transport Controls
Timbre Wolf’s Play/Stop button operates differently depending on its Sync setting (Step
Switch 13).
When set to Internal:
Press the Play/Stop button to start or stop playback.
During playback, press and hold Rec and then press Play/Stop to restart playback from
the very beginning of the pattern.
Timbre Wolf will send MIDI Start, Stop, Continue, Clock, and SongPosPtr=0 depending
on its transport state.
Timbre Wolf’s Gate Trig Out will pulse each time it advances one step.
When set to External or USB:
Timbre Wolf’s playback will respond to incoming MIDI Start, Stop, Continue, Clock, and
SongPosPtr=0 messages.
Timbre Wolf’s transport controls will not function.
When set to Gate:
Timbre Wolf will not receive any sequence position information, but you can return it
immediately to Step 1 by doing either of the following:
o While stopped, press Play/Stop.
o During playback, press and hold Rec and then press Play/Stop at the same time.
Timbre Wolf can receive Gate messages with time divisions of 1/8 or 1/16 only:
o 1/8: Two pulses will advance playback by one step.
o 1/16: One pulse will advance playback by one step.
Note: Unlike normal MIDI messages, Gate messages contain Note On messages only (no
CC messages, Note Off messages, etc.). Because of this, the Gate messages Timbre
Wolf receives are simplified.
Timbre Wolf’s Gate Trig Out will mimic its Gate Trig In.
About Patterns
Timbre Wolf can store up to 16 patterns. Each pattern consists of four sequences: Sequence
A, Sequence B, Fill A, and Fill B.
To simply play your patterns, press the Play/Stop button. To edit a Sequence or Fill, see the
end of this chapter and the Sequencer chapter.
To select a pattern, press Pattern Select and then (A) press one of the 16 Step Switches to
select the pattern of the same number or (B) turn the Tempo knob (when selecting a pattern,
the Tempo knob will not adjust the tempo). The current pattern’s Step Indicator will be lit red.
The Step Indicator of the pattern that will play next will flash. Press Pattern Select again to
return to normal operation.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai Timbre Wolf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai Timbre Wolf in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 7,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info