630521

Akai Timbre Wolf Manual

9
Zoom out
Zoom in
Previous page
1/64
Next page
9
Legato
When the legato feature is on, playing a note while another note is being held will not retrigger the
envelope for the new note, resulting in a smooth glide from the original note to the new note.
When the legato feature is off, playing a note will always trigger the envelope, giving each note
more definition.
To turn the legato feature on or off for each voice:
1. Press and hold Shift and then press Step Switch 8 (Legato). Keep holding Shift.
2. The display will show the number of current voice (1–4) and a two-letter indicator that
legato is off (Of) or on (On).
To select a voice, press Step Switch 8 (Legato) to move to the next voice (1–4).
To activate/deactivate the legato feature, turn the Tempo knob to turn the setting off (Of)
or on (On).
To return to normal operation, release Shift.
MIDI Channel
Each of the four voices responds to messages on a MIDI channel from Timbre Wolf’s
keyboard or from an external MIDI device. The MIDI Channel setting determines the channel
for Voice 1. Voices 2–4 use the three next-highest MIDI channels in sequential order.
Example: If the MIDI Channel is set to 3, Voice 1 will respond to messages on Channel 3.
Voices 2, 3, and 4 will respond to messages on Channels 4, 5, and 6 (respectively).
When the Voice Mode Selector is set to Mono, each voice will respond independently to
MIDI messages on their respective MIDI channel. The keyboard will always send its messages
on the channel of the currently selected voice.
When the Voice Mode Selector is set to Poly or Unison, all four voices will respond to
incoming MIDI messages on Voice 1’s MIDI channel only (playing polyphonically or in unison,
respectively). The keyboard will always send its messages on Voice 1’s channel.
Important: Because all four voices use adjacent MIDI channels, as described above, the
ranges of available channels are different for each voice:
• Voice 1 can use Channels 1–13
• Voice 2 can use Channels 2–14
• Voice 3 can use Channels 3–15
• Voice 4 can use Channels 4–16
Note: While Timbre Wolf’s sequencer plays, it will send out its MIDI note messages for all four
tracks (each on its corresponding channel) through its USB port and MIDI Out, regardless of
the voice mode or any performance on Timbre Wolf’s keyboard. You can use this feature to
sequence external devices (drum machines, other synths, etc.) along with Timbre Wolf.
To set the MIDI channel:
1. Press and hold Shift and then press Step Switch 10 (MIDI Ch). Keep holding Shift.
2. Do either of the following to set the channel:
Press Step Switch 10 (MIDI Ch) to move to the next channel, which is shown in the
display.
Turn the Tempo knob to select the channel, which is shown in the display.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai Timbre Wolf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai Timbre Wolf in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 7,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info