496641

Akai professional MAX49 Manual

4
Zoom out
Zoom in
Previous page
1/88
Next page
4
TOP PANEL OVERVIEW
1
3
45
6
7
7
16
16
16
16
23 24 25 26 27 28
29 29 29 29 29
17
18
19
20
21
22
7
7
22
89
10
11
12
13
14 14 14 14 14 14 14 14
15 15 15 15 15 15 15 15
666
6666
6666
1. KEYBOARD – This 49-note keyboard is
velocity-sensitive and, in conjunction with the
OCTAVE DOWN/UP buttons, can control a
ten-octave range.
2. OCTAVE DOWN/UP – These buttons can be
used to shift the KEYBOARD's range up or
down three octaves in either direction,
allowing for a ten-octave range. When you
are higher or lower than the center octaves,
the corresponding OCTAVE button will light.
3. LCD – The display is used for navigating menus, displaying data, and affecting change on MAX49's
options and parameters.
4. PITCH BEND WHEEL – Transmits MIDI Pitch Bend information to raise or lower the pitch of the
KEYBOARD temporarily.
5. MODULATION WHEEL – Transmits continuous controller data (assignable to any CC number).
6. PADS – The pads can be used to trigger drum hits or other samples in your software. The pads are
velocity-sensitive, which makes them very responsive and intuitive to play.
7. PAD BANK BUTTONS – These 4 buttons switch among pad banks A, B, C, D. Between these 4 banks
with 12 PADS per bank, you can access up to 48 MIDI events using the PADS.
8. [FULL LEVEL] – When [FULL LEVEL] is activated, the pads always play back at a maximum velocity
(127), no matter how hard or soft you hit them.
9. [NOTE REPEAT] – Holding this button while striking a pad causes the pad to retrigger at a rate based
on the current Tempo and Time Division settings. The Note Repeat feature can be synced to an
internal or external MIDI Clock source. [NOTE REPEAT] can function as a toggle or momentary button.
10. [ARP MODE] – Hold down this button and
view the illuminated PADS to determine the
Arpeggiator's current setting (each PAD has
its corresponding Arpeggiator setting printed
above it on the right-hand side). You can then
change the setting by pressing different
PADS.
11. [SEQ SELECT] – Hold down this button then press a pad with text printed above it on the left-hand
side to select a Sequence. The Sequence number is printed on the left-hand side above the bottom
four pads.
12. [ON/OFF] – This button enables and disables the internal Arpeggiator or the Sequencer, depending on
which is currently selected (indicated by its LED button). These features work in conjunction with the
Tempo and Time Division settings, which specify the rate of arpeggiation and the tempo of the
sequence. Please note that the Arpeggiator and Sequencer can be synced either to an internal or
external MIDI Clock source (such as a software DAW or a MIDI device).
Note: For more information on using MAX49's
Arpeggiator and Sequencer, please see the
ARPEGGIATOR and SEQUENCER parts of this
manual.
Note: We recommend you set the KEYBOARD,
PADS, and Sequencer to transmit MIDI data over
different channels. By default, they are all set to
the Common Channel, which means your
performance on one of those items could affect
the performance of another. To set the channels,
see the EDIT MODE section of this manual.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai professional MAX49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai professional MAX49 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info