630540
6
Zoom out
Zoom in
Previous page
1/44
Next page
6
Global Mode
Global Mode lets you set parameters and make changes to MPK225's general ("global")
functioning. These settings are not specific to a Preset; they affect all Presets.
To navigate Global Mode:
1. Press Global to enter Global Mode.
2. In each page of Global Mode:
Use the Up Cursor and Down Cursor buttons to move through the parameters on the
current page.
Use the Left Cursor and Right Cursor buttons to move between different pages.
Turn the Value Dial to change the currently selected value/setting.
3. To save the new Global Mode settings, use the Left Cursor and Right Cursor buttons to
select the Save Globals page, and press the Value Dial to confirm the operation.
To cancel the operation instead, use the Left Cursor or Right Cursor buttons to select another
page, or press Global.
To restore the factory default Global Mode settings:
1. Press Preset to enter Preset Mode.
2. Press the Left Cursor button so Factory Settings appears in the display.
3. Turn the Value Dial and select Globals.
4. To restore MPK225's factory default Global Mode settings (which overwrites those you have
saved), press the Value Dial.
To cancel the operation, press Preset.
For an overview of the available settings and parameters, see the Appendix: Mode Parameters
section.
Program Change Mode
A Program Change, often referred to as a Patch Change, is a MIDI message from one
device to another that causes the latter to switch to a new program. Using Program
Change messages, MPK225 can tell another hardware or software device which sound
to play.
For example, if your MPK225 is controlling a piano patch in your software or an external MIDI device,
sending a Program Change message from MPK225 causes it to switch to a synth patch.
The MPK225 lets you send two types of Program Change messages:
Program Change: This is a standard Program Change message (0-127) sent to your software
or external device, letting you switch between 128 different program banks.
Program Change with Bank Change: This is a standard Program Change message (0-127)
plus a Bank Select LSB (Least Significant Bit) (0-127) and a Bank Select MSB (Most Significant
Bit) message (0-127). This gives you access to up to 16384 different program banks. Your
software or external device must support LSB and MSB messages to use this feature.
To navigate Program Change Mode:
1. Press Program Change to enter Program Change Mode.
2. In each page of Program Change Mode:
Use the Up Cursor and Down Cursor buttons to move through the parameters on the
current page.
Use the Left Cursor and Right Cursor buttons to move between different pages.
Turn the Value Dial to change the currently selected value/setting.
Important: These changes cannot be saved to your Presets or global settings. Once you power
off the MPK225 they will return to the default settings.
For an overview of the available settings and parameters, see the Appendix: Mode Parameters
section.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPK225 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPK225 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPK225

Akai MPK225 User Manual - English - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info