630540
5
Zoom out
Zoom in
Previous page
1/44
Next page
5
Edit Mode
In Edit Mode, you can edit the settings of the currently selected Preset. The
settings vary depending on the controller you are editing and are listed in the
Appendix: Mode Parameters section. Please note that the changes you make
will only apply to the currently selected Preset.
To navigate Edit Mode:
1. Press Edit to enter Edit Mode.
2. Select a control to edit (pad, button, etc.) by moving or pressing it. The selected control
and its editable parameters will appear in the display.
3. In each page of Edit Mode:
Use the Up Cursor and Down Cursor buttons to move through the parameters on
the current page.
If there are multiple pages (indicated by Pg1, Pg2, etc.), use the Left Cursor and
Right Cursor buttons to move between different pages.
Turn the Value Dial to change the currently selected value/setting.
4. To edit more controls, repeat Steps 2-3.
To return to a normal performance mode, press Preset.
Important: Save the Preset to retain your edits. Without saving, these changes will be lost if
you load a new Preset. See the Preset Mode section to learn how save your Preset.
For an overview of the available controls and parameters, see the Appendix: Mode
Parameters section.
About HID
The HID (Human Interface Device) protocol lets devices send typical computer keyboard
keystrokes. USB game controllers are an example of this, acting as an alternative to your
computer's keyboard. MPK225 can also use the HID protocol, letting you configure certain
buttons to send your most-often used keystrokes to your software, so you no longer need to
switch focus constantly between the computer's keyboard and your MPK225.
To configure a control to use the HID protocol:
1. Press Edit to enter Edit Mode.
2. Select one of the Assignable Switches by pressing it. The selected button and its
editable parameters will appear in the display.
3. Turn the Value Dial to change the Type field to HID.
4. Use the Up Cursor and Down Cursor buttons to select the Key#1 field, and turn the
Value Dial to change it to the desired keystroke.
5. If your desired keystroke requires one or more modifier keys (e.g., Shift, Command, etc.),
repeat Step 4 for Key#2, which lets you select different combinations of 1-3 modifier
keys.
Important: Save the Preset to retain your edits. Without saving, these changes will be lost if
you load a new Preset. See the Preset Mode section to learn how save your Preset.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPK225 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPK225 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai MPK225

Akai MPK225 User Manual - English - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info